{"title":"Off Road Only","description":"\u003cp\u003eOffRoadOnly is a small specialty manufacturer that strives to engineer highest quality products at reasonable prices.\u003c\/p\u003e\n\u003cp\u003eFirst conceived in 1999 by experienced hobbyists, ORO was created to fulfill unmet needs and safety issues encountered in the field. Ever since they have constantly striven for ways to improve our existing products and to bring new and exciting products to the sport of 4-Wheeling. They use the latest technology to design and prototype products in-house, and field test them on the trail.\u003c\/p\u003e","products":[{"product_id":"off-road-only-swayloc-for-jeep-tj","title":"Off Road Only SwayLOC for Jeep TJ","description":"\u003cp\u003eSwayLOC is the original dual-rate swaybar that provides different control rates for off-road and on-road use. SwayLOC™ improves balance and control while providing full articulation during off-road use. It also delivers near OEM ride quality during on-road use that is more firm than the stock swaybar.\u003c\/p\u003e\n\u003cp\u003eThe dual rates are achieved through the use of two concentric torsion bars. SwayLOC™ uses a simple latching mechanism to easily change between off-road and on-road use without having to struggle with disconnect links or having to be on level ground. The proven cam latching system guarantees that SwayLOC™ engages in the correct position for on-road use and disengages for off-road use when chassis flex releases pressure on the latch.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eremote controlled version\u003c\/strong\u003e works using an air operated latch,1. The latch is controlled by an in-cab switch or automatically when equipped with AiROCK™2.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003elever controlled version\u003c\/strong\u003e has a proven cam latching system guarantees that SwayLOC™ engages in the correct position for on-road use and disengages for off-road use when chassis flex releases pressure on the latch. Flipping the lever toward the front sets the latch to engage for high on-road resistance. Flipping it toward the rear sets it to disengage for low off-road resistance.\u003c\/p\u003e\n\u003cp\u003eTurning off the lighted in-cab toggle switch automatically sets the latch to engage for high on-road resistance. Turning it on sets it to disengage for low off-road resistance.\u003c\/p\u003e\n\u003cp\u003eSwayLOC™ for TJ mounts inside of the front frame cross member. A multi-piece linkage kit is included to create a variety of linkage lengths to fit most lift heights from stock to over 10≥.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemote Controlled Version requires an air supply with a minimum of 50 PSI to disengage the latch. No air pressure is used to engage and sustain the latch for on-road use.\u003cbr\u003e\n    \u003c\/li\u003e\n  \u003cli\u003eRemote Controlled Version AiROCK™ control requires the purchase of the SwayLOC™ AiROCK™ remote control kit (SL-ARRCK).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable class=\"prod_details\" style=\"width:650px;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n  \u003ctr\u003e\n    \u003cth\u003ePart #\u003c\/th\u003e\n    \u003cth\u003eDescription\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eORO-SL-TJLV\u003c\/td\u003e\n    \u003ctd\u003eOff Road Only SwayLOC for Jeep Wrangler TJ   Manual lever control\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eORO-SL-TJRC\u003c\/td\u003e\n    \u003ctd\u003eOff Road Only SwayLOC for Jeep Wrangler TJ remote control\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/BcIwWqRfI1U\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e","brand":"Off Road Only","offers":[{"title":"ORO-SL-TJLV","offer_id":50623409455352,"sku":"ORO-SL-TJLV","price":799.0,"currency_code":"USD","in_stock":true},{"title":"ORO-SL-TJRC","offer_id":50623409488120,"sku":"ORO-SL-TJRC","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/files\/sl-tjlv-small.jpg?v=1790289398"},{"product_id":"off-road-only-swayloc-for-jeep-jl","title":"Off Road Only Sway Bar SwayLOC For 18+ Jeep JL \/ JLU Wrangler and JT Gladiator","description":"\u003cp\u003eSwayLOC for Jeep Wrangler JL and JT. Manual Option SwayLOC is the original dual-rate sway bar that provides different control rates for off-road and on-road use.\u003c\/p\u003e\n\u003cp\u003eSwayLOC improves balance and control while providing full articulation during off-road use. It also delivers near OEM ride quality during on-road use that is more firm than the stock sway bar.\u003c\/p\u003e\n\u003cp\u003eThe dual rates are achieved through the use of two concentric torsion bars. SwayLOC uses a simple latching mechanism to easily change between off-road and on-road use without having to struggle with disconnect links or having to be on level ground.\u003c\/p\u003e\n\u003cp\u003eThe proven cam latching system guarantees that SwayLOC engages in the correct position for on-road use and disengages for off-road use when chassis flex releases pressure on the latch.\u003cbr\u003e The Manual Flip a Lever version is simply that, flip the lever on the latch rearward sets the latch to disengage for low off-road resistance. Turning it off sets it to engage for high on-road resistance.\u003c\/p\u003e\n\u003cp\u003eThe spring in the latch allows you to select the operation by flipping the lever and the spring will pull the latch open or slide engaged when it should.\u003c\/p\u003e\n\u003cp\u003eThe remote-controlled version works using an air operated latch (1). The latch is controlled by an in-cab switch or automatically when equipped with AiROCK(2). Turning on the lighted in-cab toggle switch automatically sets the latch to disengage for low off-road resistance. Turning it off sets it to engage for high on-road resistance.\u003c\/p\u003e\n\u003cp\u003eThis kit comes with aluminum brackets to mount SwayLOC in the stock sway bar location.\u003c\/p\u003e\n\u003cp\u003eSome aftermarket bumpers or skid plates might require modifications to allow clearance for SwayLOC, however, it will work with stock bumper and lower valance.\u003cbr\u003e A multi-piece linkage kit is included to create a variety of linkage lengths to fit most lift heights from stock to over 10 inch.\u003c\/p\u003e\n\u003ctable class=\"prod_details\" style=\"width: 650px;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eORO-SL-JLLV\u003c\/td\u003e\n\u003ctd\u003eSwayLOC for Jeep Wrangler JL \/ JLU \u0026amp; Gladiator JT Manual Lever Control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eORO-SL-JLRC\u003c\/td\u003e\n\u003ctd\u003eSwayLOC for Jeep Wrangler JL \/ JLU \u0026amp; Gladiator JT Remote Control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManual Lever Option\u003c\/li\u003e\n\u003cli\u003eImproves balance and control\u003c\/li\u003e\n\u003cli\u003eFull articulation during off-road use\u003c\/li\u003e\n\u003cli\u003eDelivers near OEM ride quality during on-road use\u003c\/li\u003e\n\u003cli\u003eMore firm than the stock sway bar\u003c\/li\u003e\n\u003cli\u003eDual rates are achieved through the use of two concentric torsion bars\u003c\/li\u003e\n\u003cli\u003eEngages in the correct position for on-road use and disengages for off-road use when chassis flex releases pressure on the latch\u003c\/li\u003e\n\u003cli\u003eSpring in the latch allows you to select the operation by flipping the lever and the spring will pull the latch open or slide engaged when it should\u003c\/li\u003e\n\u003cli\u003eSome aftermarket bumpers or skid plates might require modifications\u003c\/li\u003e\n\u003cli\u003eMulti-piece linkage kit is included to create a variety of linkage lengths to fit most lift heights from stock to over 10 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRequires an air supply with a minimum of 50 PSI to disengage the latch. No air pressure is used to engage and sustain the latch for on-road use.\u003c\/li\u003e\n\u003cli\u003eAiROCK control requires the purchase of the SwayLOC AiROCK remote control kit (SL-AR).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BcIwWqRfI1U\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"Off Road Only","offers":[{"title":"ORO-SL-JLLV","offer_id":50623409520888,"sku":"ORO-SL-JLLV","price":899.0,"currency_code":"USD","in_stock":true},{"title":"ORO-SL-JLRC","offer_id":50623409553656,"sku":"ORO-SL-JLRC","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/files\/sl-jllv_1.jpg?v=1790289399"},{"product_id":"off-road-only-swayloc-for-jeep-xj","title":"Off Road Only SwayLOC for Jeep XJ","description":"\u003cp\u003eSwayLOC is the original dual-rate swaybar that provides different control rates for off-road and on-road use. SwayLOC improves balance and control while providing full articulation during off-road use. It also delivers near OEM ride quality during on-road use that is more firm than the stock swaybar.\u003c\/p\u003e\n\u003cp\u003eThe dual rates are achieved through the use of two concentric torsion bars. SwayLOC uses a simple latching mechanism to easily change between off-road and on-road use without having to struggle with disconnect links or having to be on level ground. The proven cam latching system guarantees that SwayLOC¬ª engages in the correct position for on-road use and disengages for off-road use when chassis flex releases pressure on the latch.\u003c\/p\u003e\n\u003cp\u003eThe remote controlled version works using an air operated latch,1. The latch is controlled by an in-cab switch. Turning off the lighted in-cab rockerswitch automatically sets the latch to engage for high on-road resistance. Turning it on sets it to disengage for low off-road resistance.\u003c\/p\u003e\n\u003cp\u003eFlipping the lever toward the front sets the latch to engage for high on-road resistance. Flipping it toward the rear sets it to disengage for low off-road resistant\u003c\/p\u003e\n\u003cp\u003eSwayLOC for XJ mountswith included brackets to the factory swaybar mounting area, and forward up to the back edge of the stock bumper. (Custom bumpers may require some trimming to clear).\u003c\/p\u003e\n\u003cp\u003eA multi-piece linkage kit is included to create a variety of linkage lengths to fit most lift heights from stock to over 10≥.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemote Control version requires an air supply with a minimum of 50 PSI to disengage the latch. No air pressure is used to engage and sustain the latch for on-road use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable class=\"prod_details\" style=\"width:650px;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n  \u003ctr\u003e\n    \u003cth\u003ePart #\u003c\/th\u003e\n    \u003cth\u003eDescription\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eORO-SL-XJLV\u003c\/td\u003e\n    \u003ctd\u003eOff Road Only SwayLOC for Jeep Wrangler XJ   lever control\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eORO-SL-XJRC\u003c\/td\u003e\n    \u003ctd\u003eOff Road Only SwayLOC for Jeep Wrangler XJ remote control\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/BcIwWqRfI1U\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e","brand":"Off Road Only","offers":[{"title":"ORO-SL-XJLV","offer_id":50623409586424,"sku":"ORO-SL-XJLV","price":835.0,"currency_code":"USD","in_stock":true},{"title":"ORO-SL-XJRC","offer_id":50623409619192,"sku":"ORO-SL-XJRC","price":1035.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/files\/sl-tjrc-small.jpg?v=1790289398"},{"product_id":"off-road-only-swayloc-for-jeep-jk","title":"Off Road Only SwayLOC for Jeep JK","description":"\u003cp\u003eSwayLOC is the original dual-rate sway bar that provides different control rates for off-road and on-road use.\u003c\/p\u003e\n\u003cp\u003eSwayLOC improves balance and control while providing full articulation during off-road use. It also delivers near OEM ride quality during on-road use that is more firm than the stock sway bar.\u003c\/p\u003e\n\u003cp\u003eThe dual rates are achieved through the use of two concentric torsion bars. SwayLOC uses a simple latching mechanism to easily change between off-road and on-road use without having to struggle with disconnect links or having to be on level ground. The proven cam latching system guarantees that SwayLOC engages in the correct position for on-road use and disengages for off-road use when chassis flex releases pressure on the latch.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eManual \"Flip a Lever\" version\u003c\/strong\u003e is simply that, flip the lever on the latch rearward sets the latch todisengage for low off-road resistance. Turning it off sets it to engage for high on-road resistance. The spring in the latch allows you to select the operation by flipping the lever and the spring will pull the latch open or slide engaged when it should.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eremote controlled version\u003c\/strong\u003e works using an air operated latch (2). The latch is controlled by an in-cab switch or automatically when equipped with AiROCK(3). Turning on the lighted in-cab toggle switch automatically sets the latch todisengage for low off-road resistance. Turning it off sets it to engage for high on-road resistance.\u003c\/p\u003e\n\u003cp\u003eThis kit comes with aluminum brackets to mount SwayLOC in the stock sway bar location.\u003c\/p\u003e\n\u003cp\u003eSome aftermarket bumpers or skid plates might require modifications to allow clearance for SwayLOC.\u003c\/p\u003e\n\u003cp\u003eA multi-piece linkage kit is included to create a variety of linkage lengths to fit most lift heights from stock to over 10≥.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eJK's with Rubicon Express or other manufacturers aftermarket front track bar relocation brackets might interfere with the driver side SwayLOC arm, however the current version will clear by mounting the latching arm on either side.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable class=\"prod_details\" style=\"width:650px;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n  \u003ctr\u003e\n    \u003cth\u003ePart #\u003c\/th\u003e\n    \u003cth\u003eDescription\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eORO-SL-JKLV\u003c\/td\u003e\n    \u003ctd\u003eOff Road Only   SwayLOC for Jeep Wrangler JK Manual lever control\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eORO-SL-JKRC\u003c\/td\u003e\n    \u003ctd\u003eOff Road Only SwayLOC for Jeep Wrangler   JK remote control\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/BcIwWqRfI1U\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e","brand":"Off Road Only","offers":[{"title":"ORO-SL-JKLV","offer_id":50623409651960,"sku":"ORO-SL-JKLV","price":899.0,"currency_code":"USD","in_stock":true},{"title":"ORO-SL-JKRC","offer_id":50623409684728,"sku":"ORO-SL-JKRC","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/files\/sl-jklv-small_1_1.jpg?v=1790289398"},{"product_id":"off-road-only-liteplate-led-light","title":"Off Road Only LitePlate LED Light","description":"\u003cp\u003e\nLitePLATE LED License plate lights are the easiest way to light up your license plate.\n\u003c\/p\u003e\n\u003cp\u003e\nThe stainless bracket is designed to be mounted behind the license plate, retained by 2 of the license plate mounting bolts passing thru the large holes which measure 7\" from center to center. The stainless bracket then hangs a poly-carbonate black housing containing 3 license plate facing white LEDs to light up the license plate. The rearward face of the black housing contains 3 red LEDs that can be hooked up to operate as a 3rd brake light or a clearance light.\n\u003c\/p\u003e\u003cp\u003e\n\u003c\/p\u003e\u003cp\u003e\nOffered in 3 versions, the difference is the length of the wire harness and whether is has a disconnect in it.\n\u003c\/p\u003e\n\u003cbr\u003e\n\n\u003ctable class=\"prod_details\" style=\"width:750px;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n  \u003ctr\u003e\n    \u003cth\u003ePart #\u003c\/th\u003e\n    \u003cth\u003eDescription\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eORO-LD-PL1\u003c\/td\u003e\n    \u003ctd\u003eComes with 1 foot of the 3 conductor 3 lead wire coming off of the LitePLATE\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eORO-LD-PL6\u003c\/td\u003e\n    \u003ctd\u003eDesigned for use with the Rockhard 4x4 parts License Plate relocation kit (RH-4007 available separately)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eORO-LD-PL7\u003c\/td\u003e\n    \u003ctd\u003eComes with 7 feet of 3 conductor wire ready to be wired into your vehicle\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Off Road Only","offers":[{"title":"ORO-LD-PL1","offer_id":50623409750264,"sku":"ORO-LD-PL1","price":35.0,"currency_code":"USD","in_stock":true},{"title":"ORO-LD-PL6","offer_id":50623409783032,"sku":"ORO-LD-PL6","price":50.0,"currency_code":"USD","in_stock":true},{"title":"ORO-LD-PL7","offer_id":50623409815800,"sku":"ORO-LD-PL7","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/files\/ld-pl7-top-small_1.jpg?v=1790289410"},{"product_id":"off-road-only-york-mini-on-board-air-kit-for-jeep-jk","title":"Off Road Only York Mini On Board Air Kit for Jeep JK","description":"\u003cp\u003eThis York Mini On Board Air kit is everything needed to install on the 2007-18 Jeep Wrangler JK. The kit consists of a manifold with full air management, a 150 PSI pressure switch and a Milton M style quick coupler. This kit does not include an air tank, which is perfect to simply fill tires as the smaller the volume being filled the quicker the pressure increase. For applications to provide air for ARBs or other pneumatic devices that require a reservoir, please add the Mini On Board Air tank kit.\n\u003c\/p\u003e\n\u003cp\u003eThe bracket in this kit will place the the york directly in front of the harmonic balancer. The clutch has an adapter that will fit into the harmonic balance like a love-joy connection. The York will be mounted with the body of the compressor forward, towards the radiator.\n\u003c\/p\u003e\n\u003cp\u003eThe York compressor is a 10cfm unit with a wet crankcase. The compressors are shipped dry. Included in the packaging is a bottle with 10 ounces of oil and a syringe to install and service the compressor. There is also a sight glass on the rear of the compressor which allows for quick inspection to ensure there is oil in the unit. 10 ounces of oil with the compressor level should display oil at the middle of the sight glass. This sight glass will be difficult to see with the compressor in position, a mirror will hep in viewing.\n\u003c\/p\u003e\n\u003cp\u003eA bracket is provided to mount the manifold in the engine compartment near cowl on the driver side, but you can mount the manifold anywhere you wish within the reach of the 6ft Teflon braided 1\/2\" diameter hose.\n\u003c\/p\u003e\n\u003cp\u003eA fused harness is provided with a relay for the clutch. A connection to the pressure switch and a single wire to tie into the provided switch, or S-Pod or other 12 volt switching device.\n\u003c\/p\u003e\n\u003cp\u003eThe inlet to the York will tie into the crankcase breather hose near the air box.\n\u003c\/p\u003e\n\n\u003ctable class=\"prod_details\" style=\"width:650px;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n  \u003ctr\u003e\n    \u003cth\u003ePart #\u003c\/th\u003e\n    \u003cth\u003eDescription\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eORO-AK-MJK07\u003c\/td\u003e\n    \u003ctd\u003eOff Road Only York Mini On Board Air kit Wrangler JK 2007-11 3.8L V6\n\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eORO-AK-MJK12\u003c\/td\u003e\n    \u003ctd\u003eOff Road Only York Mini On Board Air kit Wrangler JK 2012-18 3.6L V6\n\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Off Road Only","offers":[{"title":"ORO-AK-MJK07","offer_id":50623409848568,"sku":"ORO-AK-MJK07","price":1149.0,"currency_code":"USD","in_stock":true},{"title":"ORO-AK-MJK12","offer_id":50623409881336,"sku":"ORO-AK-MJK12","price":1149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/files\/ak-mjk12.jpg?v=1790289408"},{"product_id":"off-road-only-york-mini-on-board-air-kit-for-jeep-tj","title":"Off Road Only York Mini On Board Air Kit for Jeep TJ","description":"\u003cp\u003eThis York Mini On Board Air kit is everything needed to install on the 2000-06 Wrangler TJ. The kit consists of a manifold with full air management, a 150 PSI pressure switch and a Milton M style quick coupler. This kit does not include an air tank, which is perfect to simply fill tires as the smaller the volume being filled the quicker the pressure increase. For applications to provide air for ARBs or other pneumatic devices that require a reservoir, please add our Mini On Board Air tank kit.\u003c\/p\u003e\n\n\u003cp\u003eThe bracket in this kit will replace the aluminum mount that the alternator and belt tensioner is mounted to. The alternator will mount into the new bracket, along with the factory belt tensioner.\u003c\/p\u003e\n\n\u003cp\u003eThe York compressor is a 10cfm unit with a wet crankcase. The compressors are shipped dry. Included in the packaging is a bottle with 10 ounces of oil and a syringe to install and service the compressor. There is also a sight glass on the rear of the compressor which allows for quick inspection to ensure there is oil in the unit. 10 ounces of oil with the compressor level should display oil at the middle of the sight glass.\u003c\/p\u003e\n\n\u003cp\u003eA bracket is provided to mount the manifold in the engine compartment near the right headlight, but you can mount the manifold anywhere you wish within the reach of the 6ft Teflon braided 1\/2\" diameter hose.\u003c\/p\u003e\n\n\u003cp\u003eA fused harness is provided with a relay for the clutch. A connection to the pressure switch and a single wire to tie into the provided switch, or S-Pod or other 12 volt switching device.\u003c\/p\u003e\n\n\u003cp\u003eThe inlet to the York will tie into the crankcase breather hose near the valve cover.\u003c\/p\u003e\n\n\u003cp\u003eNotes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ci\u003e2000-06 TJ Do not need to modify factory air box\u003c\/i\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ci\u003e1997-98 TJ will need aftermarket airbox and the inner fender will need to be trimmed for clearance for the York.\u003c\/i\u003e\n\u003c\/li\u003e\n\n\u003ctable class=\"prod_details\" style=\"width:650px;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n  \u003ctr\u003e\n    \u003cth\u003ePart #\u003c\/th\u003e\n    \u003cth\u003eYear\u003c\/th\u003e\n    \u003cth\u003eFitment\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eORO-AK-MTJ06\u003c\/td\u003e\n    \u003ctd\u003e2000-06 Wrangler TJ\u003c\/td\u003e\n    \u003ctd\u003e4.0L with A\/C\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eORO-AK-MTJ06NAC\u003c\/td\u003e\n    \u003ctd\u003e2000-06 Wrangler TJ\u003c\/td\u003e\n    \u003ctd\u003e4.0L without A\/C\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eORO-AK-MTJ97\u003c\/td\u003e\n    \u003ctd\u003e1997-98 Wrangler TJ\u003c\/td\u003e\n    \u003ctd\u003e4.0L with A\/C\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/ul\u003e","brand":"Off Road Only","offers":[{"title":"ORO-AK-MTJ06","offer_id":50623409914104,"sku":"ORO-AK-MTJ06","price":1149.0,"currency_code":"USD","in_stock":true},{"title":"ORO-AK-MTJ06NAC","offer_id":50623409946872,"sku":"ORO-AK-MTJ06NAC","price":1149.0,"currency_code":"USD","in_stock":true},{"title":"ORO-AK-MTJ97","offer_id":50623409979640,"sku":"ORO-AK-MTJ97","price":1149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/files\/ak-mtj06_1.jpg?v=1790289411"},{"product_id":"off-road-only-york-compressor-bracket-kit-for-jeep-jk","title":"Off Road Only York Compressor Bracket kit for Jeep JK (Bracket Only Kit)","description":"\u003cb\u003e*York compressor and clutch not included in this package. These are only the brackets and mounting kits*\u003c\/b\u003e\n\u003cbr\u003e\u003cbr\u003e\n\n\u003cp\u003e\u003ci\u003eYork Compressor Bracket Kit 2007-11 JK 3.8L\u003c\/i\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis bracket kit is designed to mount a York heavy duty compressor with a 6 rib clutch to the 3.8L engine.\u003c\/p\u003e\n\n\u003cp\u003eThe kit includes the bracket and hardware to mount the compressor as well as the belt and idler pulleys necessary to complete the install. With this kit the compressor will be mounted to the engine with the clutch pulley between the crankshaft and the A\/C compressor. The body of the York will be positioned to the radiator side of the belt. Loosening the mounting of the york and pivoting it away from the engine is required to change the belt.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003cp\u003e\u003ci\u003eYork Compressor Bracket Kit 2012-18 JK 3.6L\u003c\/i\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis bracket kit is designed to mount a York heavy duty compressor to the front of the 3.6L engine. There is no belt in this kit as this kit does not require modification to the belt. This kit does include the clutch for a standard\/heavy duty york and that clutch is modified to accept our unique york direct drive clutch adapter.\u003c\/p\u003e\n\n\u003cp\u003eThe york will mount with the clutch on centerline of the engines crankshaft and the direct drive coupler on the clutch will engage into the harmonic balancer in a 'Love-Joy' style connection. Brackets and hardware are included to mount the compressor in this location.\u003c\/p\u003e\n\n\u003ctable class=\"prod_details\" style=\"width:650px;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n  \u003ctr\u003e\n    \u003cth\u003ePart #\u003c\/th\u003e\n    \u003cth\u003eFitment\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eAK-YBKJK07\u003c\/td\u003e\n    \u003ctd\u003eJeep Wrangler JK 2007-11\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eAK-YBKJK12\u003c\/td\u003e\n    \u003ctd\u003eJeep Wrangler JK 2012-18\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Off Road Only","offers":[{"title":"ORO-AK-YBKJK07","offer_id":50623410012408,"sku":"ORO-AK-YBKJK07","price":259.0,"currency_code":"USD","in_stock":true},{"title":"ORO-AK-YBKJK12","offer_id":50623410045176,"sku":"ORO-AK-YBKJK12","price":639.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/files\/ak-ybkjk07_1.jpg?v=1790289411"},{"product_id":"off-road-only-york-compressor-bracket-kit-for-jeep-tj","title":"Off Road Only York Compressor Bracket kit for Jeep TJ (Bracket Only Kit)","description":"\u003cb\u003e*York compressor and clutch not included in this package. These are only the brackets and mounting kits*\u003c\/b\u003e\n\u003cbr\u003e\u003cbr\u003e\n\n\u003cp\u003eThis bracket kit integrates a York air compressor to a 2000-06 Jeep Wrangler TJ or a Jeep Wrangler LJ with a 4.0L engine. The kit Works with all York compressors but a six-rib serpentine clutch is required.\u003c\/p\u003e\n\n\u003cp\u003eIt mounts the compressor to the front of the engine so it runs off of the main belt.\u003c\/p\u003e\n\n\u003cp\u003eThe ORO exclusive single belt design takes advantage of the stock automatic belt tensioner. This prevents excessive wear on the water pump bearings that can occur with other manufacture's kits.\u003c\/p\u003e\n\n\u003ctable class=\"prod_details\" style=\"width:650px;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n  \u003ctr\u003e\n    \u003cth\u003ePart #\u003c\/th\u003e\n    \u003cth\u003eFitment\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eOTO-AK-YBKTJ\u003c\/td\u003e\n    \u003ctd\u003e2000-06 Jeep Wrangler TJ\/LJ 4.0L with A\/C\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eOTO-AK-YBKTJNAC\u003c\/td\u003e\n    \u003ctd\u003e2000-06 Jeep Wrangler TJ\/LJ 4.0L without A\/C\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Off Road Only","offers":[{"title":"ORO-AK-YBKTJ","offer_id":50623410110712,"sku":"ORO-AK-YBKTJ","price":325.0,"currency_code":"USD","in_stock":true},{"title":"ORO-AK-YBKTJNAC","offer_id":50623410143480,"sku":"ORO-AK-YBKTJNAC","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/files\/ak-ybktj06nac_3.jpg?v=1790289418"},{"product_id":"oro-sl-jtrsb-parent-offroad-only-rear-sway-bar-swayloc-for-2020-jeep-jt-gladiator","title":"Offroad Only Rear Sway Bar SwayLOC for 2020+ Jeep JT Gladiator","description":"\u003cp\u003eSwayLOC for Jeep Gladiator JT.\u003c\/p\u003e\n\u003cp\u003eThe Gladiator rear SwayLOC is compatible with the stock bed and should work with custom applications as well. The arms will extend forward and are curved to allow full up-travel into the wheel well. The lower brackets included with the kit will encompass the stock bracket on the axle for the lower shock position. Simply loosen the shock bolt (complete removal is not necessary unless you have other parts mounted to that bolt, then some modification may be necessary) the SwayLOC bracket will be retained to the shock mount by an additional fastener in an existing hole, and then the lower attachment point for the linkage will capture the top side of this bracket and the stock shock bracket to allow the linkage to be mounted rigidly.\u003c\/p\u003e\n\u003cp\u003eSwayLOC should operate as intended on applications where there is up to 10-12\" of travel, beyond that some modification may be necessary to get arms to travel downward past the upper bump stop mounts.\u003c\/p\u003e\n\u003cp\u003eSwayLOC is the original dual-rate sway bar that provides different control rates for off-road and on-road use.\u003c\/p\u003e\n\u003cp\u003eSwayLOC improves balance and control while providing full articulation during off-road use. In the rear, this will provide much more roll control during on-road use, yes it is much more firm than the stock sway bar.\u003c\/p\u003e\n\u003cp\u003eThe dual rates are achieved through the use of two concentric torsion bars. SwayLOC uses a simple latching mechanism to easily change between off-road and on-road use without having to struggle with disconnect links or having to be on level ground.\u003c\/p\u003e\n\u003cp\u003eThe proven cam latching system guarantees that SwayLOC engages in the correct position for on-road use and disengages for off-road use when chassis flex releases pressure on the latch.\u003c\/p\u003e\n\u003cp\u003eAvailable in the traditional manual or pneumatic remote controlled options.\u003c\/p\u003e\n\u003cp\u003eThis kit comes with brackets that get bolted to the Gladiator frame rail (drilling is required) and a bracket that bolts to the lower shock mount to accommodate the lower link. This process puts the torsion bar above the frame and drops the links down to the lower shock mounting area, eliminating the oem style linkage dropping down from the frame.\u003c\/p\u003e\n\u003cp\u003eThe oem inner fender liner will need to be trimmed slightly, aftermarket units likely as well.\u003c\/p\u003e\n\u003cp\u003eA multi-piece linkage kit is included to create a variety of linkage lengths to fit most lift heights from stock to over 10 inch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManual Lever Option\u003c\/li\u003e\n\u003cli\u003eImproves balance and control\u003c\/li\u003e\n\u003cli\u003eFull articulation during off-road use\u003c\/li\u003e\n\u003cli\u003eDelivers near OEM ride quality during on-road use\u003c\/li\u003e\n\u003cli\u003eMore firm than the stock sway bar in both on and offroad situations\u003c\/li\u003e\n\u003cli\u003eDual rates are achieved through the use of two concentric torsion bars\u003c\/li\u003e\n\u003cli\u003eEngages in the correct position for on-road use and disengages for off-road use when chassis flex releases pressure on the latch\u003c\/li\u003e\n\u003cli\u003eSpring in the latch allows you to select the operation by flipping the lever and the spring will pull the latch open or slide engaged when it should\u003c\/li\u003e\n\u003cli\u003eMulti-piece linkage kit is included to create a variety of linkage lengths to fit most lift heights from stock to over 10 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemote kit requires an air supply with a minimum of 50 PSI to disengage the latch. No air pressure is used to engage and sustain the latch for on-road use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable style=\"max-width: 650px;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\" class=\"prod_details\"\u003e\n  \u003ctr\u003e\n    \u003cth\u003ePart #\u003c\/th\u003e\n    \u003cth\u003eDescription\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eORO-SL-JTLVR\u003c\/td\u003e\n    \u003ctd\u003eGladiator Rear Sway Bar SwayLOC for 2020+ JT Gladiator (Manual Lever Control)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eORO-SL-JTRCR\u003c\/td\u003e\n    \u003ctd\u003eGladiator Rear Sway Bar SwayLOC for 2020+ JT Gladiator (Remote Control)\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Off Road Only","offers":[{"title":"ORO-SL-JTLVR","offer_id":50623410176248,"sku":"ORO-SL-JTLVR","price":1199.0,"currency_code":"USD","in_stock":true},{"title":"ORO-SL-JTRCR","offer_id":50623410209016,"sku":"ORO-SL-JTRCR","price":1399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/files\/swayloc-final-copy2-e1706630381243_2.jpg?v=1790289420"},{"product_id":"off-road-only-hop-stopper-for-jeep-jk","title":"Off Road Only Hop-Stopper for Jeep JK","description":"\u003cp\u003eHop-Stopper is OffRoadOnly's solution to the Wrangler JK hood flutter.\u003c\/p\u003e\n\u003cp\u003eThis part is manufactured of stainless steel and assembles below the steel tube structure of the grill that the hood hook catches on when the hood is opened.\u003c\/p\u003e\n\u003cp\u003eWhen the hood is closed, the hood hook passes through the Hop-Stopper and then simply pushing the lever to the closed position, the hood hook is retained solidly below the grille tube structure and the hood is now 100% retained, no movement at all!\u003c\/p\u003e\n\u003cp\u003eThe Hop-Stopper is engaged by reaching through the middle grill slot, but it is mounted high enough that you can't see it from the front of the vehicle. You need to reach in and feel it to know its there.\u003c\/p\u003e","brand":"Off Road Only","offers":[{"title":"Default Title","offer_id":50623410241784,"sku":"ORO-HS-JK","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/files\/hs-jk.jpg?v=1790289419"},{"product_id":"off-road-only-tire-inflation-kit-soft-poly-coil-hose-with-milton-coupler-and-locking-tire-chuck","title":"Off Road Only Tire Inflation Kit, Soft Poly Coil Hose, With Milton Coupler and Locking Tire Chuck","description":"\u003cp\u003eORO Tire Inflation Kit. Kit comes completely assembled and ready for use as shown. The 20 foot coiled air hose is a soft polyurethane product that does not kink or crack in cold weather. The tire end is a locking chuck that works with most all offroad wheels where you can push the coupler straight onto the tire valve stem.\u003c\/p\u003e","brand":"Off Road Only","offers":[{"title":"Default Title","offer_id":50623410274552,"sku":"ORO-AK-TI","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/files\/tie-inflation-kit.jpg?v=1790289420"},{"product_id":"off-road-only-flasher-relay-for-led-taillights-5-pin-01-06-tj-only","title":"Off Road Only Flasher Relay for LED Taillights 5 Pin 01-06 TJ ONLY","description":"\u003cp\u003eThis flasher is a plug n play option to convert the TJ 5 pin flasher to LED compatible.\u003c\/p\u003e\n\u003cp\u003eThe 2001-2006 Wrangler TJs and LJs with the headlight switch on the turn signal stalk require a flasher replacement to correct the fast flash. This flasher that we source will correct those flashing issues.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Customers have used this flasher when the front turn signal bulbs have been converted to LED's as well. On some occasions this has proven to work well for that conversion. However, most of the time, converting front and rear lights to LEDS and installing this flasher will result in flashing issues.\u003c\/p\u003e","brand":"Off Road Only","offers":[{"title":"Default Title","offer_id":50623410569464,"sku":"ORO-LD-FLTJ01","price":34.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/files\/ld-fltj.jpg?v=1790289426"},{"product_id":"off-road-only-york-mini-on-board-air-kit-wrangler-jl-2018-up-3-6l","title":"Off Road Only York Mini On Board Air Kit Wrangler JL 2018-Up 3.6L","description":"\u003cp\u003eThis York Mini On Board Air kit is everything needed to install on the 2018-up Wrangler JL with 3.6L. The kit consists of a manifold with full air management, a 150 PSI pressure switch and a Milton M style quick coupler. This kit does not include an air tank, This is perfect to simply fill tires as the smaller the volume being filled the quicker the pressure increase. For applications to provide air for ARBs or other pneumatic devices that require a reservoir, please add our Mini On Board Air tank kit.\u003c\/p\u003e\n\u003cp\u003eThe bracket in this kit will place the the york directly in front of the harmonic balancer. The clutch has an adaptor that will fit into the harmonic balance like a love-joy connection. The York will be mounted with the body of the compressor forward, towards the radiator. A bracket is included to relocate the vacuum pump to the side of the compressor. The coolant Tee assembly in the lower hose needs to me moved to the passenger side, a nipple and hose extension is included to make the engine side longer, and the radiator side will be trimmed down slightly to allow the tee to fit.\u003c\/p\u003e\n\u003cp\u003eThe York compressor is a 10cfm unit with a wet crankcase. The compressors are shipped dry. Included in the packaging is a bottle with 10 ounces of oil and a syringe to install and service the compressor. There is also a sight glass on the rear of the compressor which allows for quick inspection to ensure there is oil in the unit. 10 ounces of oil with the compressor level should display oil at the middle of the sight glass. This sight glass will be difficult to see with the compressor in position, a mirror will hep in viewing.\u003c\/p\u003e\n\u003cp\u003eA bracket is provided to mount the manifold in the engine compartment near cowl on the driver side, but you can mount the manifold anywhere you wish within the reach of the 6ft Teflon braided ¬Ω\" diameter hose.\u003c\/p\u003e\n\u003cp\u003eA fused harness is provided with a relay for the clutch. A connection to the pressure switch and a single wire to tie into the provided switch, or S-Pod or other 12 volt switching device.\u003c\/p\u003e\n\u003cp\u003eThe inlet to the York will tie into the crankcase breather hose near the intake manifold.\u003c\/p\u003e\n\u003cp\u003eFor AiROCK air suspension use, please add both the Mini On Board Air Tank Kit and the Mini Filter Kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*Note:\u003c\/strong\u003e May not be compatible with some supercharger kits. Contact us to discuss if you have a supercharger and wish to install th\u003c\/p\u003e","brand":"Off Road Only","offers":[{"title":"Default Title","offer_id":50623410602232,"sku":"ORO-AK-MJL18","price":1149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/files\/ak-mjl18_1.jpg?v=1790289426"},{"product_id":"off-road-only-litebox-fast-flash-fix-for-all-wrangler-jk-s","title":"Off Road Only LiteBOX Fast Flash Fix for ALL Wrangler JK'S","description":"\u003cp\u003eORO designed this product to fix the Fast Flash problem that exists on all Jeep Wrangler JK's when you swap to the LED taillights, like the LiteDOTs.\u003c\/p\u003e\n\u003cp\u003eThe solution to keeping the flashers working properly is to keep the load of the turn signal bulb in the circuit.\u003c\/p\u003e\n\u003cp\u003eThese aluminum boxes allow you to unplug the taillight bulb socket from the stock taillight and attached it to the LiteBOX opening. This will hold the bulb away from the wiring and other things inside the fender well while allowing the bulb to operate normally. This solves the fast flash solution. Simply wire your LED taillights in the harness between the bulb socket and the OEM connector for the taillight harness.\u003c\/p\u003e\n\u003cp\u003eThis product comes with 2 LiteBOX's, 4 retaining clips and 2 self drilling screws.\u003c\/p\u003e","brand":"Off Road Only","offers":[{"title":"Default Title","offer_id":50623410635000,"sku":"ORO-LD-LB","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/files\/ld-lb-small.jpg?v=1790289427"},{"product_id":"off-road-only-litedot-mounting-bracket-for-over-4-or-4-5-hole","title":"Off Road Only LiteDOT Mounting Bracket for Over 4\" or 4.5\" Hole","description":"\u003cp\u003eThis pair of stainless steel mounting brackets and hardware will allow you to mount the 5≥ outside diameter LiteDOTs over a 4≥ or 4.5≥ hole that was cut to mount a rubber grommit style taillight.\u003c\/p\u003e\n\u003cp\u003eLiteDOTs not included.\u003c\/p\u003e","brand":"Off Road Only","offers":[{"title":"Default Title","offer_id":50623410667768,"sku":"ORO-LD-MB","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/files\/ld-mb-small.jpg?v=1790289428"},{"product_id":"off-road-only-litepanels-mounting-kit-for-litedots-on-all-wrangler-jk-s-mount-only","title":"Off Road Only LitePANELs Mounting Kit for LiteDOTS on ALL Wrangler JK'S (Mount Only)","description":"\u003cp\u003eThese ABS plastic molded panels are designed to fit perfectly on the curves of the stock JK sheetmetal.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\n\n\u003cp\u003eThe LitePANELs allow the ORO LiteDOT LED taillights to fit directly onto the JK, no body modifications necessary.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\n\n\u003cp\u003eThe LitePANELs are retained by the LiteDOT mounting hardware, using a stainless bracket to clamp the assembly to the body.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\n\n\u003cp\u003eIncluded with this kit is the ORO LiteBOX kit, which will allow the retention of the factory turn signal bulb, thereby eliminating fast flash and bulb out warnings.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\n\n\u003cp\u003eLitePANELs are finished as matte black and textured to match the other Wrangler parts, but can also be painted to match the body.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\n\n\u003cp\u003e\u003cb\u003e*ORO LiteDOTs sold separately.\u003c\/b\u003e\u003c\/p\u003e","brand":"Off Road Only","offers":[{"title":"Default Title","offer_id":50623410700536,"sku":"ORO-LD-LP","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/files\/litepanel-left_1.jpg?v=1790289433"},{"product_id":"off-road-only-litedot-and-litepanel-combo-for-jeep-jk","title":"Off Road Only LiteDOT and LitePANEL Combo for Jeep JK","description":"\u003cp\u003eLitePANELs are a plastic molded panel that allows direct mounting of our OffRoadOnly LiteDOT LED taillight to 2007-current Jeep Wrangler JK Models. There is no body modification required, no holes to drill and nothing that prevents the stock taillight from being re-installed at a later date.\u003c\/p\u003e\n\u003cp\u003eThe LitePANELs are molded in a matte black finish, textured to match the Jeep gas tank filler and tailgate hinges. The LitePANELS may be painted to match the body with auto body grade urethane paints or DIY aerosol paints. The LitePANELs are molded to match the contours of the Jeep Wrangler body panels perfectly. Simply remove the stock taillight, assemble the LiteDOT taillights (included in this combo kit ) to the LitePANELS with the supplied hardware and retaining bracket, perform the steps with the included parts to prevent the turn signals from flashing fast and attach the LiteDOT and LitePANELs assembly to the body and tighten the LiteDOT mounting screws to retain.\u003c\/p\u003e\n\u003cp\u003eThis LitePANELs Combo kit includes the following ; One pair of molded LitePANELs. Brackets and hardware to mount LitePANELs when using OffRoadOnly LiteDOTs LED taillights. LiteBOXs, the fast flash solution. All electrical parts required to install as we have designed them. One pair of OffRoadOnly LiteDOTs LED taillights.\u003cbr\u003eThese, as well as all of the products that OffRoadOnly designs and produces, are 100% Made in the USA!\u003c\/p\u003e","brand":"Off Road Only","offers":[{"title":"Default Title","offer_id":50623410733304,"sku":"ORO-LD-LPC","price":359.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/files\/litepanel-kit.jpg?v=1790289434"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/collections\/ORO-logo-200x200.jpg?v=1790291302","url":"https:\/\/polyperformance.com\/collections\/off-road-only.oembed","provider":"POLY PERFORMANCE","version":"1.0","type":"link"}