{"title":"Longfield Drivetrain","description":"\u003cp\u003eLongfield Drivetrain is a premier off-road brand specializing in heavy-duty drivetrain components for Toyota and Suzuki vehicles. Acquired and manufactured by Trail-Gear, they are best known for their indestructible ring and pinion gear sets, chromoly birfields and axle shafts. Longfield parts are designed to handle extreme stress, large tires, and low crawler gears.\u003c\/p\u003e","products":[{"product_id":"tgi-14030x-parent-longfield-samurai-ring-pinion-gears","title":"Longfield Suzuki Samurai Ring \u0026 Pinion Gears","description":"\u003cp\u003eLooking for a Ring \u0026amp; Pinion that you can rely on even on the most punishing trails? Longfield is proud to offer Longfield Ring \u0026amp; Pinion Gears. These are the very same gears that have won multiple championships in professional desert racing \u0026amp; competitive rock crawling circuits and have proven themselves on some of the most grueling off-road courses in the world.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat makes Longfield Ring \u0026amp; Pinion Gears the best on the market?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Materials:\u003c\/strong\u003e Longfield use heat-treated 8620 chromoly tool steel for strength and wear resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Gear Teeth:\u003c\/strong\u003e Longfield only use the 5-cut process on the ring gear teeth instead of the cheaper 2-cut process used by most other aftermarket vendors. The 5-cut process results in teeth with a tapered tooth profile. This increases contact area and spreads the contact load along a wider area, resulting in less stress on the ring gear teeth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Machining:\u003c\/strong\u003eThe gear teeth are cut using Gleason CNC hobbing machines \u0026amp; cutters. Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency. The higher accuracy and surface finish also produces a quieter-running gear set, which means they will work great on the daily driver too.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Finish:\u003c\/strong\u003eAll Standard Finish ring gears are black phosphate coated for wear resistance \u0026amp; corrosion protection. The black phosphate coating provides a microporous layer on the surface to hold lubricants to minimize friction between gear teeth. This results in less wear during the initial break-in period and increases the overall life of the gears.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Value:\u003c\/strong\u003e Longfield go directly to Tier 1 OEM manufacturers to have gears made to Longfield's exact specifications. By cutting out the middlemen, Longfield can offer the highest quality gears at a competitive price.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRING \u0026amp; PINION BREAK-IN PROCEDURE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll new 3rd members require a break-in period to prevent damage from overheating. Any overloading or overheating during these periods can cause the gear oil to break down resulting in ring \u0026amp; pinion failure.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAfter installation drive lightly for 20-30 minutes and then allow the diff to cool for at least two hours.\u003c\/li\u003e\n\u003cli\u003eAvoid heavy throttle use during the first 500 miles.\u003c\/li\u003e\n\u003cli\u003eDo not tow a trailer during the first 500 miles.\u003c\/li\u003e\n\u003cli\u003eChange oil after 500 miles to remove any particles suspended in the oil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis may seem unnecessary, but it is very easy to damage the differential by loading it before the gear set is completely run in. New ring \u0026amp; pinion gears create excess heat when they are new. This excess heat can damage the heat treatment of the gears.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifcations:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from tool-grade 8620 steel and heat-treated for maximum strength and wear resistance.\u003c\/li\u003e\n\u003cli\u003eThe gear teeth are cut using Gleason CNC hobbing machines \u0026amp; cutters. Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency.\u003c\/li\u003e\n\u003cli\u003eHigher accuracy and surface finish also produces a quieter-running gear set.\u003c\/li\u003e\n\u003cli\u003eGear teeth are cut using the 5-cut process to increase contact area to reduce load distribution and reduce stress on the gear teeth.\u003c\/li\u003e\n\u003cli\u003eBlack phosphate coating on ring gear to reduce friction \u0026amp; wear during break-in.\u003c\/li\u003e\n\u003cli\u003ePinion Spline: 26-Spline\u003c\/li\u003e\n\u003cli\u003eRing Gear Bolts: 10 bolts (Ring Gear Bolts not included)\u003c\/li\u003e\n\u003cli\u003eRing Gear Diameter: 6.9\"\u003c\/li\u003e\n\u003cli\u003eRing Gear Rotation: Standard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1986-1995 Suzuki Samurai 1.3L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable class=\"prod_details\" style=\"max-width: 650px;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-140301-3-KIT\u003c\/td\u003e\n\u003ctd\u003eLongfield Suzuki Samurai Ring \u0026amp; Pinion Gears - 4.57\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-140302-3-KIT\u003c\/td\u003e\n\u003ctd\u003eLongfield Suzuki Samurai Ring \u0026amp; Pinion Gears - 5.38\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eCompatible Lockers\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"prod_details\" style=\"max-width: 650px;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eARB Front (22-Spline)\u003c\/th\u003e\n\u003cth\u003eARB Rear (26-Spline)\u003c\/th\u003e\n\u003cth\u003eSpool\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-140301-3-KIT\u003c\/td\u003e\n\u003ctd\u003eARB-RD205\u003c\/td\u003e\n\u003ctd\u003eARB-RD208\u003c\/td\u003e\n\u003ctd\u003e141043-3-KIT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-140302-3-KIT\u003c\/td\u003e\n\u003ctd\u003eARB-RD205\u003c\/td\u003e\n\u003ctd\u003eARB-RD208\u003c\/td\u003e\n\u003ctd\u003e141043-3-KIT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Longfield Drivetrain","offers":[{"title":"TGI-140301-3-KIT","offer_id":50623133712632,"sku":"TGI-140301-3-KIT","price":302.84,"currency_code":"USD","in_stock":true},{"title":"TGI-140302-3-KIT","offer_id":50623133745400,"sku":"TGI-140302-3-KIT","price":303.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/files\/tgi-14030x_parent.jpg?v=1790282437"},{"product_id":"tgi-sf29-parent-longfield-super-finished-29-spline-ring-and-pinion-gear","title":"Longfield Super Finish 29-Spline Toyota 8\" Ring \u0026 Pinion Gears","description":"\u003cp\u003eLooking for a Toyota Ring \u0026amp; Pinion that is even stronger thanLongfield's Ring \u0026amp; Pinion gears but with ZERO break-in? Longfield's are proud to introduce Longfield Super Finish 29-Spline Ring \u0026amp; Pinion gears. The 29-spline section on the pinion shaft is 7% bigger in diameter than the standard 27-spline pinion shaft, resulting in fewer broken pinion shafts. These are the very same gears that have won multiple championships in professional desert racing \u0026amp; competitive rock crawling circuits and have proven themselves on some of the most grueling off-road courses in the world.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat makes Longfield Ring \u0026amp; Pinion Gears the best on the market?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Materials:\u003c\/strong\u003e Longfield use heat-treated 8620 chromoly tool steel for strength and wear resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Gear Teeth:\u003c\/strong\u003e Longfield only use the 5-cut process on the ring gear teeth instead of the cheaper 2-cut process used by most other aftermarket vendors. The 5-cut process results in teeth with a tapered tooth profile. This increases contact area and spreads the contact load along a wider area, resulting in less stress on the ring gear teeth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Machining:\u003c\/strong\u003eThe gear teeth are cut using Gleason CNC hobbing machines \u0026amp; cutters. Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency. The higher accuracy and surface finish also produces a quieter-running gear set, which means they will work great on the daily driver too.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Finish:\u003c\/strong\u003e Longfield's Super Finish gears allow you to skip the break-in period and get on the trail now! The aerospace-grade REM® Isotropic Super Finishing (ISF ®) process removes the microscopic peaks in the material and creates a surface on the ring and pinion gears with a roughness of less than 10 ¬µin average surface roughness. This means that there is less friction between the gears, reducing wear by 95% and allowing the gears and bearings to run cooler and last longer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Value:\u003c\/strong\u003e Longfield go directly to Tier 1 OEM manufacturers to have gears made to Longfield's exact specifications. By cutting out the middlemen, Longfield can offer the highest quality gears at a competitive price.\u003c\/p\u003e\n\u003cp\u003eOn Toyota trucks Longfield recommend 4.88's for 33\" tires and 5.29 for 35\" and larger.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from tool-grade 8620 steel and heat-treated for maximum strength and wear resistance.\u003c\/li\u003e\n\u003cli\u003eThe gear teeth are cut using Gleason CNC hobbing machines \u0026amp; cutters. Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency.\u003c\/li\u003e\n\u003cli\u003eHigher accuracy and surface finish also produces a quieter-running gear set.\u003c\/li\u003e\n\u003cli\u003eGear teeth are cut using the 5-cut process to increase contact area to reduce load distribution and reduce stress on the gear teeth.\u003c\/li\u003e\n\u003cli\u003eNo break-in period.\u003c\/li\u003e\n\u003cli\u003eLess friction.\u003c\/li\u003e\n\u003cli\u003eReduced wear allowing bearings and gears to last longer.\u003c\/li\u003e\n\u003cli\u003eTreated with REM® Isotropic Super Finishing (ISF) process.\u003c\/li\u003e\n\u003cli\u003eThe REM® Isotropic Super Finishing (ISF) process removes the microscopic peaks in the material and creates a surface on the ring and pinion gears with a roughness of less than 10 ¬µin Ra! This means that there is less friction between the gears, reducing wear by 95% and allowing the gears and bearings to run cooler and last longer.\u003c\/li\u003e\n\u003cli\u003eNon-directional surface that increases lubricant retention on the gear surface, reducing lubrication requirements.\u003c\/li\u003e\n\u003cli\u003ePinion Spline: 29-Spline\u003c\/li\u003e\n\u003cli\u003eRing Gear Bolts: 10 bolts (Ring Gear Bolts not included)\u003c\/li\u003e\n\u003cli\u003eRing Gear Diameter: 8\"\u003c\/li\u003e\n\u003cli\u003eRing Gear Rotation (4-Cyl \u0026amp; V6): Standard\u003c\/li\u003e\n\u003cli\u003eRing Gear Rotation (Hi-Pinion): Reverse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1979-1985 Toyota Pickup - Front \u0026amp; Rear, Requires 29-Spline Diff Flange, Nut \u0026amp; Seal, 4-CYL \u0026amp; V6\u003c\/li\u003e\n\u003cli\u003e1986-1995 Toyota Pickup - Rear Only, Requires 29-Spline Diff Flange, Nut \u0026amp; Seal, 4-CYL \u0026amp; V6\u003c\/li\u003e\n\u003cli\u003e1984-1985 Toyota 4Runner - Front \u0026amp; Rear, Requires 29-Spline Diff Flange, Nut \u0026amp; Seal, 4-CYL \u0026amp; V6\u003c\/li\u003e\n\u003cli\u003e1986-1995 Toyota 4Runner - Rear Only, Requires 29-Spline Diff Flange, Nut \u0026amp; Seal, 4-CYL \u0026amp; V6\u003c\/li\u003e\n\u003cli\u003e1979-1985 Toyota Pickup - Front Only, Requires Hi-Pinion Housing, 29-Spline Diff Flange, Nut \u0026amp; Seal, HI-PINION\u003c\/li\u003e\n\u003cli\u003e1984-1985 Toyota 4Runner - Front Only, Requires Hi-Pinion Housing, 29-Spline Diff Flange, Nut \u0026amp; Seal, HI-PINION\u003c\/li\u003e\n\u003cli\u003e1990-1997 Toyota Land Cruiser FJ80 - Front Only, Requires 29-Spline Diff Flange, Nut \u0026amp; Seal, HI-PINION\u003c\/li\u003e\n\u003cli\u003e1991-1997Lexus LX450 - Front Only, Requires 29-Spline Diff Flange, Nut \u0026amp; Seal, HI-PINION\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWill not fit 7.5\" IFS front axles or 8\" IFS Clamshell front axles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable class=\"prod_details\" style=\"max-width: 85%;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304521-1\u003c\/td\u003e\n\u003ctd\u003eLongfield Super Finish 29-Spline Toyota 4-Cyl 8\" Ring \u0026amp; Pinion Gears - 4.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304522-1\u003c\/td\u003e\n\u003ctd\u003eLongfield Super Finish 29-Spline Toyota 4-Cyl 8\" Ring \u0026amp; Pinion Gears - 5.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304519-1\u003c\/td\u003e\n\u003ctd\u003eLongfield Super Finish 29-Spline Toyota V6 8\" Ring \u0026amp; Pinion Gears - 4.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304520-1\u003c\/td\u003e\n\u003ctd\u003eLongfield Super Finish 29-Spline Toyota V6 8\" Ring \u0026amp; Pinion Gears - 5.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304523-1\u003c\/td\u003e\n\u003ctd\u003eLongfield Super Finish 29-Spline Toyota Hi-Pinion 8\" Ring \u0026amp; Pinion Gears - 4.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304524-1\u003c\/td\u003e\n\u003ctd\u003eLongfield Super Finish 29-Spline Toyota Hi-Pinion 8\" Ring \u0026amp; Pinion Gears - 5.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eCompatible Lockers\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"prod_details\" style=\"max-width: 85%;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eARB\u003c\/th\u003e\n\u003cth\u003eDetroit\u003c\/th\u003e\n\u003cth\u003eTrueTrac\u003c\/th\u003e\n\u003cth\u003eGrizzly\u003c\/th\u003e\n\u003cth\u003eZip\u003c\/th\u003e\n\u003cth\u003eSpool\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304521-1\u003c\/td\u003e\n\u003ctd\u003eARB-RD132\u003c\/td\u003e\n\u003ctd\u003eEAT-70752\u003c\/td\u003e\n\u003ctd\u003eEAT-TT70P52889\u003c\/td\u003e\n\u003ctd\u003eYGA-28019\u003c\/td\u003e\n\u003ctd\u003eYGA-34033\u003c\/td\u003e\n\u003ctd\u003e140163-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304522-1\u003c\/td\u003e\n\u003ctd\u003eARB-RD132\u003c\/td\u003e\n\u003ctd\u003eEAT-70752\u003c\/td\u003e\n\u003ctd\u003eEAT-TT70P52889\u003c\/td\u003e\n\u003ctd\u003eYGA-28019\u003c\/td\u003e\n\u003ctd\u003eYGA-34033\u003c\/td\u003e\n\u003ctd\u003e140163-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304519-1\u003c\/td\u003e\n\u003ctd\u003eARB-RD132\u003c\/td\u003e\n\u003ctd\u003eEAT-70985\u003c\/td\u003e\n\u003ctd\u003eEAT-TT70P52888\u003c\/td\u003e\n\u003ctd\u003eYGA-28020\u003c\/td\u003e\n\u003ctd\u003eYGA-34034\u003c\/td\u003e\n\u003ctd\u003e140164-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304520-1\u003c\/td\u003e\n\u003ctd\u003eARB-RD132\u003c\/td\u003e\n\u003ctd\u003eEAT-70985\u003c\/td\u003e\n\u003ctd\u003eEAT-TT70P52888\u003c\/td\u003e\n\u003ctd\u003eYGA-28020\u003c\/td\u003e\n\u003ctd\u003eYGA-34034\u003c\/td\u003e\n\u003ctd\u003e140164-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304523-1\u003c\/td\u003e\n\u003ctd\u003eARB-RD132\u003c\/td\u003e\n\u003ctd\u003eEAT-70985\u003c\/td\u003e\n\u003ctd\u003eEAT-TT70P52888\u003c\/td\u003e\n\u003ctd\u003eYGA-28020\u003c\/td\u003e\n\u003ctd\u003eYGA-34034\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304524-1\u003c\/td\u003e\n\u003ctd\u003eARB-RD132\u003c\/td\u003e\n\u003ctd\u003eEAT-70985\u003c\/td\u003e\n\u003ctd\u003eEAT-TT70P52888\u003c\/td\u003e\n\u003ctd\u003eYGA-28020\u003c\/td\u003e\n\u003ctd\u003eYGA-34034\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Longfield Drivetrain","offers":[{"title":"TGI-304521-1 (4-Cyl, 4.88)","offer_id":50623133778168,"sku":"TGI-304521-1","price":371.29,"currency_code":"USD","in_stock":true},{"title":"TGI-304522-1 (4-Cyl, 5.29)","offer_id":50623133810936,"sku":"TGI-304522-1","price":371.29,"currency_code":"USD","in_stock":true},{"title":"TGI-304519-1 (V6, 4.88)","offer_id":50623133843704,"sku":"TGI-304519-1","price":371.29,"currency_code":"USD","in_stock":true},{"title":"TGI-304520-1 (V6, 5.29)","offer_id":50623133876472,"sku":"TGI-304520-1","price":371.29,"currency_code":"USD","in_stock":true},{"title":"TGI-304523-1 (Hi-Pinion, 4.88)","offer_id":50623133909240,"sku":"TGI-304523-1","price":371.29,"currency_code":"USD","in_stock":true},{"title":"TGI-304524-1 (Hi-Pinion, 5.29)","offer_id":50623133942008,"sku":"TGI-304524-1","price":371.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/files\/tgi-sf29_parent.jpg?v=1790282443"},{"product_id":"tgi-tc29srpgk-parent-longfield-29-spline-ring-pinion-gear-kit","title":"Longfield 29-Spline Toyota 8\" Ring \u0026 Pinion Gears","description":"\u003cp\u003eLooking for a Toyota Ring \u0026amp; Pinion that is even stronger than Longfield Ring \u0026amp; Pinion gears? Longfield are proud to introduce Longfield 29-Spline Ring \u0026amp; Pinion gears. The 29-spline section on the pinion shaft is 7% bigger in diameter than the standard 27-spline pinion shaft, resulting in fewer broken pinion shafts. These are the very same gears that have won multiple championships in professional desert racing \u0026amp; competitive rock crawling circuits and have proven themselves on some of the most grueling off-road courses in the world.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat makes Longfield Ring \u0026amp; Pinion Gears the best on the market?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Materials:\u003c\/strong\u003e Longfield use heat-treated 8620 chromoly tool steel for strength and wear resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Gear Teeth:\u003c\/strong\u003e Longfield only use the 5-cut process on the ring gear teeth instead of the cheaper 2-cut process used by most other aftermarket vendors. The 5-cut process results in teeth with a tapered tooth profile. This increases contact area and spreads the contact load along a wider area, resulting in less stress on the ring gear teeth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Machining:\u003c\/strong\u003eThe gear teeth are cut using Gleason CNC hobbing machines \u0026amp; cutters. Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency. The higher accuracy and surface finish also produces a quieter-running gear set, which means they will work great on the daily driver too.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Finish:\u003c\/strong\u003eAll Standard Finish ring gears are black phosphate coated for wear resistance \u0026amp; corrosion protection. The black phosphate coating provides a microporous layer on the surface to hold lubricants to minimize friction between gear teeth. This results in less wear during the initial break-in period and increases the overall life of the gears.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Value:\u003c\/strong\u003e Longfield go directly to Tier 1 OEM manufacturers to have gears made to Longfield's exact specifications. By cutting out the middlemen, Longfield can offer the highest quality gears at a competitive price.\u003c\/p\u003e\n\u003cp\u003eOn Toyota trucks Longfield recommend 4.88's for 33\" tires and 5.29 for 35\" and larger.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRING \u0026amp; PINION BREAK-IN PROCEDURE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll new 3rd members require a break-in period to prevent damage from overheating. Any overloading or overheating during these periods can cause the gear oil to break down resulting in ring \u0026amp; pinion failure.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAfter installation drive lightly for 20-30 minutes and then allow the diff to cool for at least two hours.\u003c\/li\u003e\n\u003cli\u003eAvoid heavy throttle use during the first 500 miles.\u003c\/li\u003e\n\u003cli\u003eDo not tow a trailer during the first 500 miles.\u003c\/li\u003e\n\u003cli\u003eChange oil after 500 miles to remove any particles suspended in the oil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis may seem unnecessary, but it is very easy to damage the differential by loading it before the gear set is completely run in. New ring \u0026amp; pinion gears create excess heat when they are new. This excess heat can damage the heat treatment of the gears.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from tool-grade 8620 steel and heat-treated for maximum strength and wear resistance.\u003c\/li\u003e\n\u003cli\u003eThe gear teeth are cut using Gleason CNC hobbing machines \u0026amp; cutters. Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency.\u003c\/li\u003e\n\u003cli\u003eHigher accuracy and surface finish also produces a quieter-running gear set.\u003c\/li\u003e\n\u003cli\u003eGear teeth are cut using the 5-cut process to increase contact area to reduce load distribution and reduce stress on the gear teeth.\u003c\/li\u003e\n\u003cli\u003eBlack phosphate coating on ring gear to reduce friction \u0026amp; wear during break-in.\u003c\/li\u003e\n\u003cli\u003ePinion Spline: 29-Spline\u003c\/li\u003e\n\u003cli\u003eRing Gear Bolts: 10 bolts (Ring Gear Bolts not included)\u003c\/li\u003e\n\u003cli\u003eRing Gear Diameter: 8\"\u003c\/li\u003e\n\u003cli\u003eRing Gear Rotation (4-Cyl \u0026amp; V6): Standard\u003c\/li\u003e\n\u003cli\u003eRing Gear Rotation (Hi-Pinion): Reverse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1979-1985 Toyota Pickup - Front \u0026amp; Rear, Requires 29-Spline Diff Flange, Nut \u0026amp; Seal, 4-CYL \u0026amp; V6\u003c\/li\u003e\n\u003cli\u003e1986-1995 Toyota Pickup - Rear Only, Requires 29-Spline Diff Flange, Nut \u0026amp; Seal, 4-CYL \u0026amp; V6\u003c\/li\u003e\n\u003cli\u003e1984-1985 Toyota 4Runner - Front \u0026amp; Rear, Requires 29-Spline Diff Flange, Nut \u0026amp; Seal, 4-CYL \u0026amp; V6\u003c\/li\u003e\n\u003cli\u003e1986-1995 Toyota 4Runner - Rear Only, Requires 29-Spline Diff Flange, Nut \u0026amp; Seal, 4-CYL \u0026amp; V6\u003c\/li\u003e\n\u003cli\u003e1979-1985 Toyota Pickup - Front Only, Requires Hi-Pinion Housing, 29-Spline Diff Flange, Nut \u0026amp; Seal, HI-PINION\u003c\/li\u003e\n\u003cli\u003e1984-1985 Toyota 4Runner - Front Only, Requires Hi-Pinion Housing, 29-Spline Diff Flange, Nut \u0026amp; Seal, HI-PINION\u003c\/li\u003e\n\u003cli\u003e1990-1997 Toyota Land Cruiser FJ80 - Front Only, Requires 29-Spline Diff Flange, Nut \u0026amp; Seal, HI-PINION\u003c\/li\u003e\n\u003cli\u003e1991-1997Lexus LX450 - Front Only, Requires 29-Spline Diff Flange, Nut \u0026amp; Seal, HI-PINION\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWill not fit 7.5\" IFS front axles or 8\" IFS Clamshell front axles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable class=\"prod_details\" style=\"max-width: 85%;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304111-1\u003c\/td\u003e\n\u003ctd\u003eLongfield 29-Spline Toyota 4-Cyl 8\" Ring \u0026amp; Pinion Gears - 4.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304112-1\u003c\/td\u003e\n\u003ctd\u003eLongfield 29-Spline Toyota 4-Cyl 8\" Ring \u0026amp; Pinion Gears - 5.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-303928-1\u003c\/td\u003e\n\u003ctd\u003eLongfield 29-Spline Toyota V6 8\" Ring \u0026amp; Pinion Gears - 4.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-303929-1\u003c\/td\u003e\n\u003ctd\u003eLongfield 29-Spline Toyota V6 8\" Ring \u0026amp; Pinion Gears - 5.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304256-1\u003c\/td\u003e\n\u003ctd\u003eLongfield 29-Spline Toyota Hi-Pinion 8\" Ring \u0026amp; Pinion Gears - 4.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304257-1\u003c\/td\u003e\n\u003ctd\u003eLongfield 29-Spline Toyota Hi-Pinion 8\" Ring \u0026amp; Pinion Gears - 5.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eCompatible Lockers\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"prod_details\" style=\"max-width: 85%;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eARB\u003c\/th\u003e\n\u003cth\u003eDetroit\u003c\/th\u003e\n\u003cth\u003eTrueTrac\u003c\/th\u003e\n\u003cth\u003eGrizzly\u003c\/th\u003e\n\u003cth\u003eZip\u003c\/th\u003e\n\u003cth\u003eSpool\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304111-1\u003c\/td\u003e\n\u003ctd\u003eARB-RD132\u003c\/td\u003e\n\u003ctd\u003eEAT-70752\u003c\/td\u003e\n\u003ctd\u003eEAT-TT70P52889\u003c\/td\u003e\n\u003ctd\u003eYGA-28019\u003c\/td\u003e\n\u003ctd\u003eYGA-34033\u003c\/td\u003e\n\u003ctd\u003e140163-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304112-1\u003c\/td\u003e\n\u003ctd\u003eARB-RD132\u003c\/td\u003e\n\u003ctd\u003eEAT-70752\u003c\/td\u003e\n\u003ctd\u003eEAT-TT70P52889\u003c\/td\u003e\n\u003ctd\u003eYGA-28019\u003c\/td\u003e\n\u003ctd\u003eYGA-34033\u003c\/td\u003e\n\u003ctd\u003e140163-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-303928-1\u003c\/td\u003e\n\u003ctd\u003eARB-RD132\u003c\/td\u003e\n\u003ctd\u003eEAT-70985\u003c\/td\u003e\n\u003ctd\u003eEAT-TT70P52888\u003c\/td\u003e\n\u003ctd\u003eYGA-28020\u003c\/td\u003e\n\u003ctd\u003eYGA-34034\u003c\/td\u003e\n\u003ctd\u003e140164-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-303929-1\u003c\/td\u003e\n\u003ctd\u003eARB-RD132\u003c\/td\u003e\n\u003ctd\u003eEAT-70985\u003c\/td\u003e\n\u003ctd\u003eEAT-TT70P52888\u003c\/td\u003e\n\u003ctd\u003eYGA-28020\u003c\/td\u003e\n\u003ctd\u003eYGA-34034\u003c\/td\u003e\n\u003ctd\u003e140164-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304256-1\u003c\/td\u003e\n\u003ctd\u003eARB-RD132\u003c\/td\u003e\n\u003ctd\u003eEAT-70985\u003c\/td\u003e\n\u003ctd\u003eEAT-TT70P52888\u003c\/td\u003e\n\u003ctd\u003eYGA-28020\u003c\/td\u003e\n\u003ctd\u003eYGA-34034\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304257-1\u003c\/td\u003e\n\u003ctd\u003eARB-RD132\u003c\/td\u003e\n\u003ctd\u003eEAT-70985\u003c\/td\u003e\n\u003ctd\u003eEAT-TT70P52888\u003c\/td\u003e\n\u003ctd\u003eYGA-28020\u003c\/td\u003e\n\u003ctd\u003eYGA-34034\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Longfield Drivetrain","offers":[{"title":"TGI-304111-1 (4-Cyl, 4.88)","offer_id":50623133974776,"sku":"TGI-304111-1","price":288.42,"currency_code":"USD","in_stock":true},{"title":"TGI-304112-1 (4-Cyl, 5.29)","offer_id":50623134007544,"sku":"TGI-304112-1","price":288.42,"currency_code":"USD","in_stock":true},{"title":"TGI-303928-1 (V6, 4.88)","offer_id":50623134040312,"sku":"TGI-303928-1","price":288.42,"currency_code":"USD","in_stock":true},{"title":"TGI-303929-1 (V6, 5.29)","offer_id":50623134073080,"sku":"TGI-303929-1","price":288.42,"currency_code":"USD","in_stock":true},{"title":"TGI-304256-1 (Hi-Pinion, 4.88)","offer_id":50623134105848,"sku":"TGI-304256-1","price":288.42,"currency_code":"USD","in_stock":true},{"title":"TGI-304257-1 (Hi-Pinion, 5.29)","offer_id":50623134138616,"sku":"TGI-304257-1","price":288.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/files\/tgi-tc29srpgk_parent.jpg?v=1790282443"},{"product_id":"tgi-tc29sprp29sfk-parent-longfield-29-spline-ring-pinion-gears-with-29-spline-flange-kit","title":"Longfield 29-Spline Toyota 8\" Ring \u0026 Pinion Gears with 29-Spline Flange Kit","description":"\u003cp\u003eThis is the easiest and most affordable way to upgrade your Toyota 8\" differential with stronger 29-spline Ring \u0026amp; Pinion gears. Includes your choice of Longfield 29-Spline Ring \u0026amp; Pinion gears along with our 29-Spline Quadruple-Drilled Differential Flange with dust shield, 29-spline Trail-Safe‚Ñ¢ Pinion Seal, and 29-spline pinion nut. High-pinion sets also include a high-pinion oil slinger.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat makes Longfield Ring \u0026amp; Pinion Gears the best on the market?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Materials:\u003c\/strong\u003eWe use heat-treated 8620 chromoly tool steel for strength and wear resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Gear Teeth:\u003c\/strong\u003eWe only use the 5-cut process on the ring gear teeth instead of the cheaper 2-cut process used by most other aftermarket vendors. The 5-cut process results in teeth with a tapered tooth profile. This increases contact area and spreads the contact load along a wider area, resulting in less stress on the ring gear teeth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Machining:\u003c\/strong\u003eThe gear teeth are cut using Gleason CNC hobbing machines \u0026amp; cutters. Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency. The higher accuracy and surface finish also produces a quieter-running gear set, which means they will work great on the daily driver too.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Finish:\u003c\/strong\u003eAll Standard Finish ring gears are black phosphate coated for wear resistance \u0026amp; corrosion protection. The black phosphate coating provides a microporous layer on the surface to hold lubricants to minimize friction between gear teeth. This results in less wear during the initial break-in period and increases the overall life of the gears.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Value:\u003c\/strong\u003eWe go directly to Tier 1 OEM manufacturers to have gears made to our exact specifications. By cutting out the middlemen, we can offer the highest quality gears at a competitive price.\u003c\/p\u003e\n\u003cp\u003eOn Toyota trucks we recommend 4.88's for 33\" tires and 5.29 for 35\" and larger.\u003c\/p\u003e\n\u003cp\u003eRING \u0026amp; PINION BREAK-IN PROCEDURE\u003c\/p\u003e\n\u003cp\u003eAll new 3rd members require a break-in period to prevent damage from overheating. Any overloading or overheating during these periods can cause the gear oil to break down resulting in ring \u0026amp; pinion failure.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAfter installation drive lightly for 20-30 minutes and then allow the diff to cool for at least two hours.\u003c\/li\u003e\n\u003cli\u003eAvoid heavy throttle use during the first 500 miles.\u003c\/li\u003e\n\u003cli\u003eDo not tow a trailer during the first 500 miles.\u003c\/li\u003e\n\u003cli\u003eChange oil after 500 miles to remove any particles suspended in the oil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis may seem unnecessary, but it is very easy to damage the differential by loading it before the gear set is completely run in. New ring \u0026amp; pinion gears create excess heat when they are new. This excess heat can damage the heat treatment of the gears.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from tool-grade 8620 steel and heat-treated for maximum strength and wear resistance.\u003c\/li\u003e\n\u003cli\u003eThe gear teeth are cut using Gleason CNC hobbing machines \u0026amp; cutters. Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency.\u003c\/li\u003e\n\u003cli\u003eHigher accuracy and surface finish also produces a quieter-running gear set.\u003c\/li\u003e\n\u003cli\u003eGear teeth are cut using the 5-cut process to increase contact area to reduce load distribution and reduce stress on the gear teeth.\u003c\/li\u003e\n\u003cli\u003eBlack phosphate coating on ring gear to reduce friction \u0026amp; wear during break-in.\u003c\/li\u003e\n\u003cli\u003ePinion Spline: 29-Spline\u003c\/li\u003e\n\u003cli\u003eRing Gear Bolts: 10 bolts (Ring Gear Bolts not included)\u003c\/li\u003e\n\u003cli\u003eRing Gear Diameter: 8\"\u003c\/li\u003e\n\u003cli\u003eRing Gear Rotation (4-Cyl \u0026amp; V6): Standard\u003c\/li\u003e\n\u003cli\u003eRing Gear Rotation (Hi-Pinion): Reverse\u003c\/li\u003e\n\u003cli\u003eIncludes forged chromoly 29-spline Quadruple-drilled flange with dust shield, 29-spline Trail-Safe‚Ñ¢ Pinion Seal, and 29-spline pinion nut\u003c\/li\u003e\n\u003cli\u003eDust shield pre-installed onto flange\u003c\/li\u003e\n\u003cli\u003eHigh-pinion sets also include a high-pinion oil slinger.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFlange is Quadruple drilled with the most popular Pickup\/4Runner \u0026amp; Tacoma Patterns:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e66mm x 66mm x 11mm (Tacoma)\u003c\/li\u003e\n\u003cli\u003e60mm x 60mm x 10mm (Pickup\/4Runner and TG Heavy Duty Driveline)\u003c\/li\u003e\n\u003cli\u003e60mm x 68.3mm x 10mm\u003c\/li\u003e\n\u003cli\u003e61.5mm x 70mm x 10mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1979-1985 Toyota Pickup - Front \u0026amp; Rear, 4-CYL \u0026amp; V6\u003c\/li\u003e\n\u003cli\u003e1986-1995 Toyota Pickup - Rear Only, 4-CYL \u0026amp; V6\u003c\/li\u003e\n\u003cli\u003e1984-1985 Toyota 4Runner - Front \u0026amp; Rear, 4-CYL \u0026amp; V6\u003c\/li\u003e\n\u003cli\u003e1986-1995 Toyota 4Runner - Rear Only, 4-CYL \u0026amp; V6\u003c\/li\u003e\n\u003cli\u003e1979-1985 Toyota Pickup - Front Only, HI-PINION\u003c\/li\u003e\n\u003cli\u003e1984-1985 Toyota 4Runner - Front Only, HI-PINION\u003c\/li\u003e\n\u003cli\u003e1990-1997 Toyota Land Cruiser FJ80 - Front Only, HI-PINION\u003c\/li\u003e\n\u003cli\u003e1991-1997 Lexus LX450 - Front Only, HI-PINION\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWill not fit 7.5\" IFS front axles or 8\" IFS Clamshell front axles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable class=\"prod_details\" style=\"max-width: 85%;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304254-1-KIT\u003c\/td\u003e\n\u003ctd\u003eLongfield 29-Spline Toyota 4-Cyl 8\" Ring \u0026amp; Pinion Gears - 4.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304255-1-KIT\u003c\/td\u003e\n\u003ctd\u003eLongfield 29-Spline Toyota 4-Cyl 8\" Ring \u0026amp; Pinion Gears - 5.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304252-1-KIT\u003c\/td\u003e\n\u003ctd\u003eLongfield 29-Spline Toyota V6 8\" Ring \u0026amp; Pinion Gears - 4.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304253-1-KIT\u003c\/td\u003e\n\u003ctd\u003eLongfield 29-Spline Toyota V6 8\" Ring \u0026amp; Pinion Gears - 5.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304509-1-KIT\u003c\/td\u003e\n\u003ctd\u003eLongfield 29-Spline Toyota Hi-Pinion 8\" Ring \u0026amp; Pinion Gears - 4.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304510-1-KIT\u003c\/td\u003e\n\u003ctd\u003eLongfield 29-Spline Toyota Hi-Pinion 8\" Ring \u0026amp; Pinion Gears - 5.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eCompatible Lockers\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"prod_details\" style=\"max-width: 85%;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eARB\u003c\/th\u003e\n\u003cth\u003eDetroit\u003c\/th\u003e\n\u003cth\u003eTrueTrac\u003c\/th\u003e\n\u003cth\u003eGrizzly\u003c\/th\u003e\n\u003cth\u003eZip\u003c\/th\u003e\n\u003cth\u003eSpool\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304254-1-KIT\u003c\/td\u003e\n\u003ctd\u003eARB-RD132\u003c\/td\u003e\n\u003ctd\u003eEAT-70752\u003c\/td\u003e\n\u003ctd\u003eEAT-TT70P52889\u003c\/td\u003e\n\u003ctd\u003eYGA-28019\u003c\/td\u003e\n\u003ctd\u003eYGA-34033\u003c\/td\u003e\n\u003ctd\u003e140163-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304255-1-KIT\u003c\/td\u003e\n\u003ctd\u003eARB-RD132\u003c\/td\u003e\n\u003ctd\u003eEAT-70752\u003c\/td\u003e\n\u003ctd\u003eEAT-TT70P52889\u003c\/td\u003e\n\u003ctd\u003eYGA-28019\u003c\/td\u003e\n\u003ctd\u003eYGA-34033\u003c\/td\u003e\n\u003ctd\u003e140163-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304252-1-KIT\u003c\/td\u003e\n\u003ctd\u003eARB-RD132\u003c\/td\u003e\n\u003ctd\u003eEAT-70985\u003c\/td\u003e\n\u003ctd\u003eEAT-TT70P52888\u003c\/td\u003e\n\u003ctd\u003eYGA-28020\u003c\/td\u003e\n\u003ctd\u003eYGA-34034\u003c\/td\u003e\n\u003ctd\u003e140164-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304253-1-KIT\u003c\/td\u003e\n\u003ctd\u003eARB-RD132\u003c\/td\u003e\n\u003ctd\u003eEAT-70985\u003c\/td\u003e\n\u003ctd\u003eEAT-TT70P52888\u003c\/td\u003e\n\u003ctd\u003eYGA-28020\u003c\/td\u003e\n\u003ctd\u003eYGA-34034\u003c\/td\u003e\n\u003ctd\u003e140164-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304509-1-KIT\u003c\/td\u003e\n\u003ctd\u003eARB-RD132\u003c\/td\u003e\n\u003ctd\u003eEAT-70985\u003c\/td\u003e\n\u003ctd\u003eEAT-TT70P52888\u003c\/td\u003e\n\u003ctd\u003eYGA-28020\u003c\/td\u003e\n\u003ctd\u003eYGA-34034\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304510-1-KIT\u003c\/td\u003e\n\u003ctd\u003eARB-RD132\u003c\/td\u003e\n\u003ctd\u003eEAT-70985\u003c\/td\u003e\n\u003ctd\u003eEAT-TT70P52888\u003c\/td\u003e\n\u003ctd\u003eYGA-28020\u003c\/td\u003e\n\u003ctd\u003eYGA-34034\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Longfield Drivetrain","offers":[{"title":"TGI-304254-1-KIT (4-Cyl, 4.88)","offer_id":50623134171384,"sku":"TGI-304254-1-KIT","price":303.6,"currency_code":"USD","in_stock":true},{"title":"TGI-304255-1-KIT (4-Cyl, 5.29)","offer_id":50623134204152,"sku":"TGI-304255-1-KIT","price":303.6,"currency_code":"USD","in_stock":true},{"title":"TGI-304252-1-KIT (V6, 4.88)","offer_id":50623134236920,"sku":"TGI-304252-1-KIT","price":303.6,"currency_code":"USD","in_stock":true},{"title":"TGI-304253-1-KIT (V6, 5.29)","offer_id":50623134269688,"sku":"TGI-304253-1-KIT","price":303.6,"currency_code":"USD","in_stock":true},{"title":"TGI-304509-1-KIT (Hi-Pinion, 4.88)","offer_id":50623134302456,"sku":"TGI-304509-1-KIT","price":303.6,"currency_code":"USD","in_stock":true},{"title":"TGI-304510-1-KIT (Hi-Pinion, 5.29)","offer_id":50623134335224,"sku":"TGI-304510-1-KIT","price":303.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/files\/tgi-tc29sprp29sfk_parent.jpg?v=1790282444"},{"product_id":"tgi-29spline-parent-longfield-super-finished-29-spline-ring-pinion-gear-set-with-29-spline-flange-kit","title":"Longfield Super Finish 29-Spline Toyota 8\" Ring \u0026 Pinion Gears with 29-Spline Flange Kit","description":"\u003cp\u003eUpgrade your Toyota 8\" differential with stronger 29-spline Ring \u0026amp; Pinion gears and ZERO break-in with Longfield Super Finish 29-Spline Ring \u0026amp; Pinion Gear Set with 29-Spline Flange Kits.\u003c\/p\u003e\n\u003cp\u003eIncludes your choice of Longfield Super Finished 29-Spline Ring \u0026amp; Pinion gears along with our 29-Spline Quadruple-Drilled Differential Flange with dust shield, 29-spline Trail-Safe Pinion Seal, and 29-spline pinion nut. High-pinion sets also include a high-pinion oil slinger. Even better, the 29-spline section on the pinion shaft is 7% bigger in diameter than the standard 27-spline pinion shaft, resulting in fewer broken pinion shafts. These are the very same gears that have won multiple championships in professional desert racing \u0026amp; competitive rock crawling circuits and have proven themselves on some of the most grueling off-road courses in the world.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat makes Longfield Ring \u0026amp; Pinion Gears the best on the market?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Materials:\u003c\/strong\u003e Longfield use heat-treated 8620 chromoly tool steel for strength and wear resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Gear Teeth:\u003c\/strong\u003e Longfield only use the 5-cut process on the ring gear teeth instead of the cheaper 2-cut process used by most other aftermarket vendors. The 5-cut process results in teeth with a tapered tooth profile. This increases contact area and spreads the contact load along a wider area, resulting in less stress on the ring gear teeth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Machining:\u003c\/strong\u003eThe gear teeth are cut using Gleason CNC hobbing machines \u0026amp; cutters. Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency. The higher accuracy and surface finish also produces a quieter-running gear set, which means they will work great on the daily driver too.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Finish:\u003c\/strong\u003e Longfield's Super Finish gears allow you to skip the break-in period and get on the trail now! The aerospace-grade REM® Isotropic Super Finishing (ISF ®) process removes the microscopic peaks in the material and creates a surface on the ring and pinion gears with a roughness of less than 10 ¬µin average surface roughness. This means that there is less friction between the gears, reducing wear by 95% and allowing the gears and bearings to run cooler and last longer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Value:\u003c\/strong\u003e Longfield go directly to Tier 1 OEM manufacturers to have gears made to our exact specifications. By cutting out the middlemen, Longfield can offer the highest quality gears at a competitive price.\u003c\/p\u003e\n\u003cp\u003eOn Toyota trucks Longfield recommend 4.88's for 33\" tires and 5.29 for 35\" and larger.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from tool-grade 8620 steel and heat-treated for maximum strength and wear resistance.\u003c\/li\u003e\n\u003cli\u003eThe gear teeth are cut using Gleason CNC hobbing machines \u0026amp; cutters. Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency.\u003c\/li\u003e\n\u003cli\u003eHigher accuracy and surface finish also produces a quieter-running gear set.\u003c\/li\u003e\n\u003cli\u003eGear teeth are cut using the 5-cut process to increase contact area to reduce load distribution and reduce stress on the gear teeth.\u003c\/li\u003e\n\u003cli\u003eNo break-in period.\u003c\/li\u003e\n\u003cli\u003eLess friction.\u003c\/li\u003e\n\u003cli\u003eReduced wear allowing bearings and gears to last longer.\u003c\/li\u003e\n\u003cli\u003eTreated with REM® Isotropic Super Finishing (ISF) process.\u003c\/li\u003e\n\u003cli\u003eThe REM® Isotropic Super Finishing (ISF) process removes the microscopic peaks in the material and creates a surface on the ring and pinion gears with a roughness of less than 10 ¬µin Ra! This means that there is less friction between the gears, reducing wear by 95% and allowing the gears and bearings to run cooler and last longer.\u003c\/li\u003e\n\u003cli\u003eNon-directional surface that increases lubricant retention on the gear surface, reducing lubrication requirements.\u003c\/li\u003e\n\u003cli\u003ePinion Spline: 29-Spline\u003c\/li\u003e\n\u003cli\u003eRing Gear Bolts: 10 bolts (Ring Gear Bolts not included)\u003c\/li\u003e\n\u003cli\u003eRing Gear Diameter: 8\"\u003c\/li\u003e\n\u003cli\u003eRing Gear Rotation (4-Cyl \u0026amp; V6): Standard\u003c\/li\u003e\n\u003cli\u003eRing Gear Rotation (Hi-Pinion): Reverse\u003c\/li\u003e\n\u003cli\u003eIncludes forged chromoly 29-spline Quadruple-drilled flange with dust shield, 29-spline Trail-Safe‚Ñ¢ Pinion Seal, and 29-spline pinion nut\u003c\/li\u003e\n\u003cli\u003eDust shield pre-installed onto flange\u003c\/li\u003e\n\u003cli\u003eHigh-pinion sets also include a high-pinion oil slinger.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFlange is Quadruple drilled with the most popular Pickup\/4Runner \u0026amp; Tacoma Patterns:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e66mm x 66mm x 11mm (Tacoma)\u003c\/li\u003e\n\u003cli\u003e60mm x 60mm x 10mm (Pickup\/4Runner and TG Heavy Duty Driveline)\u003c\/li\u003e\n\u003cli\u003e60mm x 68.3mm x 10mm\u003c\/li\u003e\n\u003cli\u003e61.5mm x 70mm x 10mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1979-1985 Toyota Pickup - Front \u0026amp; Rear, 4-CYL \u0026amp; V6\u003c\/li\u003e\n\u003cli\u003e1986-1995 Toyota Pickup - Rear Only, 4-CYL \u0026amp; V6\u003c\/li\u003e\n\u003cli\u003e1984-1985 Toyota 4Runner - Front \u0026amp; Rear, 4-CYL \u0026amp; V6\u003c\/li\u003e\n\u003cli\u003e1986-1995 Toyota 4Runner - Rear Only, 4-CYL \u0026amp; V6\u003c\/li\u003e\n\u003cli\u003e1979-1985 Toyota Pickup - Front Only, HI-PINION\u003c\/li\u003e\n\u003cli\u003e1984-1985 Toyota 4Runner - Front Only, HI-PINION\u003c\/li\u003e\n\u003cli\u003e1990-1997 Toyota Land Cruiser FJ80 - Front Only, HI-PINION\u003c\/li\u003e\n\u003cli\u003e1991-1997 Lexus LX450 - Front Only, HI-PINION\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWill not fit 7.5\" IFS front axles or 8\" IFS Clamshell front axles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable class=\"prod_details\" style=\"max-width: 85%;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304614-1-KIT\u003c\/td\u003e\n\u003ctd\u003eLongfield Super Finish 29-Spline Toyota 4-Cyl 8\" Ring \u0026amp; Pinion Gears - 4.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304615-1-KIT\u003c\/td\u003e\n\u003ctd\u003eLongfield Super Finish 29-Spline Toyota 4-Cyl 8\" Ring \u0026amp; Pinion Gears - 5.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304612-1-KIT\u003c\/td\u003e\n\u003ctd\u003eLongfield Super Finish 29-Spline Toyota V6 8\" Ring \u0026amp; Pinion Gears - 4.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304613-1-KIT\u003c\/td\u003e\n\u003ctd\u003eLongfield Super Finish 29-Spline Toyota V6 8\" Ring \u0026amp; Pinion Gears - 5.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304616-1-KIT\u003c\/td\u003e\n\u003ctd\u003eLongfield Super Finish 29-Spline Toyota Hi-Pinion 8\" Ring \u0026amp; Pinion Gears - 4.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304617-1-KIT\u003c\/td\u003e\n\u003ctd\u003eLongfield Super Finish 29-Spline Toyota Hi-Pinion 8\" Ring \u0026amp; Pinion Gears - 5.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eCompatible Lockers\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"prod_details\" style=\"max-width: 85%;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eARB\u003c\/th\u003e\n\u003cth\u003eDetroit\u003c\/th\u003e\n\u003cth\u003eTrueTrac\u003c\/th\u003e\n\u003cth\u003eGrizzly\u003c\/th\u003e\n\u003cth\u003eZip\u003c\/th\u003e\n\u003cth\u003eSpool\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304614-1-KIT\u003c\/td\u003e\n\u003ctd\u003eARB-RD132\u003c\/td\u003e\n\u003ctd\u003eEAT-70752\u003c\/td\u003e\n\u003ctd\u003eEAT-TT70P52889\u003c\/td\u003e\n\u003ctd\u003eYGA-28019\u003c\/td\u003e\n\u003ctd\u003eYGA-34033\u003c\/td\u003e\n\u003ctd\u003e140163-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304615-1-KIT\u003c\/td\u003e\n\u003ctd\u003eARB-RD132\u003c\/td\u003e\n\u003ctd\u003eEAT-70752\u003c\/td\u003e\n\u003ctd\u003eEAT-TT70P52889\u003c\/td\u003e\n\u003ctd\u003eYGA-28019\u003c\/td\u003e\n\u003ctd\u003eYGA-34033\u003c\/td\u003e\n\u003ctd\u003e140163-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304612-1-KIT\u003c\/td\u003e\n\u003ctd\u003eARB-RD132\u003c\/td\u003e\n\u003ctd\u003eEAT-70985\u003c\/td\u003e\n\u003ctd\u003eEAT-TT70P52888\u003c\/td\u003e\n\u003ctd\u003eYGA-28020\u003c\/td\u003e\n\u003ctd\u003eYGA-34034\u003c\/td\u003e\n\u003ctd\u003e140164-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304613-1-KIT\u003c\/td\u003e\n\u003ctd\u003eARB-RD132\u003c\/td\u003e\n\u003ctd\u003eEAT-70985\u003c\/td\u003e\n\u003ctd\u003eEAT-TT70P52888\u003c\/td\u003e\n\u003ctd\u003eYGA-28020\u003c\/td\u003e\n\u003ctd\u003eYGA-34034\u003c\/td\u003e\n\u003ctd\u003e140164-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304616-1-KIT\u003c\/td\u003e\n\u003ctd\u003eARB-RD132\u003c\/td\u003e\n\u003ctd\u003eEAT-70985\u003c\/td\u003e\n\u003ctd\u003eEAT-TT70P52888\u003c\/td\u003e\n\u003ctd\u003eYGA-28020\u003c\/td\u003e\n\u003ctd\u003eYGA-34034\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-304617-1-KIT\u003c\/td\u003e\n\u003ctd\u003eARB-RD132\u003c\/td\u003e\n\u003ctd\u003eEAT-70985\u003c\/td\u003e\n\u003ctd\u003eEAT-TT70P52888\u003c\/td\u003e\n\u003ctd\u003eYGA-28020\u003c\/td\u003e\n\u003ctd\u003eYGA-34034\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Longfield Drivetrain","offers":[{"title":"TGI-304614-1-KIT (4-Cyl, 4.88)","offer_id":50623134662904,"sku":"TGI-304614-1-KIT","price":455.4,"currency_code":"USD","in_stock":true},{"title":"TGI-304615-1-KIT (4-Cyl, 5.29)","offer_id":50623134695672,"sku":"TGI-304615-1-KIT","price":455.4,"currency_code":"USD","in_stock":true},{"title":"TGI-304612-1-KIT (V6, 4.88)","offer_id":50623134728440,"sku":"TGI-304612-1-KIT","price":455.4,"currency_code":"USD","in_stock":true},{"title":"TGI-304613-1-KIT (V6, 5.29)","offer_id":50623134761208,"sku":"TGI-304613-1-KIT","price":455.4,"currency_code":"USD","in_stock":true},{"title":"TGI-304616-1-KIT (Hi-Pinion, 4.88)","offer_id":50623134793976,"sku":"TGI-304616-1-KIT","price":455.4,"currency_code":"USD","in_stock":true},{"title":"TGI-304617-1-KIT (Hi-Pinion, 5.29)","offer_id":50623134826744,"sku":"TGI-304617-1-KIT","price":455.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/files\/tgi-29spline_parent.jpg?v=1790282455"},{"product_id":"tgi-toy84rpg-parent-longfield-super-finish-8-4-inch-ring-and-pinion-gears","title":"Longfield Super Finish Toyota 8.4\" Ring \u0026 Pinion Gears","description":"\u003cp\u003eLooking for a Ring \u0026amp; Pinion that you can rely on even on the most punishing trails? Longfield is proud to offer Longfield Super Finish Ring \u0026amp; Pinion Gears. These are the very same gears that have won multiple championships in professional desert racing \u0026amp; competitive rock crawling circuits and have proven themselves on some of the most grueling off-road courses in the world.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat makes Longfield Ring \u0026amp; Pinion Gears the best on the market?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Materials:\u003c\/strong\u003e Longfield use heat-treated 8620 chromoly tool steel for strength and wear resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Gear Teeth:\u003c\/strong\u003e Longfield only use the 5-cut process on the ring gear teeth instead of the cheaper 2-cut process used by most other aftermarket vendors. The 5-cut process results in teeth with a tapered tooth profile. This increases contact area and spreads the contact load along a wider area, resulting in less stress on the ring gear teeth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Machining:\u003c\/strong\u003eThe gear teeth are cut using Gleason CNC hobbing machines \u0026amp; cutters. Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency. The higher accuracy and surface finish also produces a quieter-running gear set, which means they will work great on the daily driver too.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Finish:\u003c\/strong\u003eOur Super Finish gears allow you to skip the break-in period and get on the trail now! The aerospace-grade REM® Isotropic Super Finishing (ISF ®) process removes the microscopic peaks in the material and creates a surface on the ring and pinion gears with a roughness of less than 10 ¬µin average surface roughness. This means that there is less friction between the gears, reducing wear by 95% and allowing the gears and bearings to run cooler and last longer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Value:\u003c\/strong\u003eWe go directly to Tier 1 OEM manufacturers to have gears made to our exact specifications. By cutting out the middlemen, we can offer the highest quality gears at a competitive price.\u003c\/p\u003e\n\u003cp\u003eOn Toyota trucks we recommend 4.88's for 33\" tires and 5.29 for 35\" and larger.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from tool-grade 8620 steel and heat-treated for maximum strength and wear resistance.\u003c\/li\u003e\n\u003cli\u003eThe gear teeth are cut using Gleason CNC hobbing machines \u0026amp; cutters. Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency.\u003c\/li\u003e\n\u003cli\u003eHigher accuracy and surface finish also produces a quieter-running gear set.\u003c\/li\u003e\n\u003cli\u003eGear teeth are cut using the 5-cut process to increase contact area to reduce load distribution and reduce stress on the gear teeth.\u003c\/li\u003e\n\u003cli\u003eNo break-in period.\u003c\/li\u003e\n\u003cli\u003eLess friction.\u003c\/li\u003e\n\u003cli\u003eReduced wear allowing bearings and gears to last longer.\u003c\/li\u003e\n\u003cli\u003eTreated with REM® Isotropic Super Finishing (ISF) process.\u003c\/li\u003e\n\u003cli\u003eThe REM® Isotropic Super Finishing (ISF) process removes the microscopic peaks in the material and creates a surface on the ring and pinion gears with a roughness of less than 10 ¬µin Ra! This means that there is less friction between the gears, reducing wear by 95% and allowing the gears and bearings to run cooler and last longer.\u003c\/li\u003e\n\u003cli\u003eNon-directional surface that increases lubricant retention on the gear surface, reducing lubrication requirements.\u003c\/li\u003e\n\u003cli\u003eFor Toyota 8.4\" rear axles only. Will not fit 8\" IFS Clamshell or 8\" solid axles.\u003c\/li\u003e\n\u003cli\u003ePinion Spline: 30-Spline\u003c\/li\u003e\n\u003cli\u003eRing Gear Bolts: 12 bolts (Ring Gear Bolts not included)\u003c\/li\u003e\n\u003cli\u003eRing Gear Diameter: 8.4\"\u003c\/li\u003e\n\u003cli\u003eRing Gear Rotation: Standard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1995-2015 Toyota Tacoma - Non E-Locker Only\u003c\/li\u003e\n\u003cli\u003e1999-2006 Toyota Tundra\u003c\/li\u003e\n\u003cli\u003e1993-1998 Toyota T100\u003c\/li\u003e\n\u003cli\u003e2001-2007 Toyota Sequoia\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable class=\"prod_details\" style=\"max-width: 650px;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-311563\u003c\/td\u003e\n\u003ctd\u003eLongfield Super Finish 4.88 Toyota 8.4\" Ring \u0026amp; Pinion Gears\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-311564\u003c\/td\u003e\n\u003ctd\u003eLongfield Super Finish 5.29 Toyota 8.4\" Ring \u0026amp; Pinion Gears\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eCompatible Lockers\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"prod_details\" style=\"max-width: 650px;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eARB\u003c\/th\u003e\n\u003cth\u003eEaton E-Locker\u003c\/th\u003e\n\u003cth\u003eDetroit Locker\u003c\/th\u003e\n\u003cth\u003eSpool\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-311563\u003c\/td\u003e\n\u003ctd\u003eARB-RD129\u003c\/td\u003e\n\u003ctd\u003eEAT-14216-1\u003c\/td\u003e\n\u003ctd\u003eEAT-187SL199A\u003c\/td\u003e\n\u003ctd\u003eYGA-32384\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-311564\u003c\/td\u003e\n\u003ctd\u003eARB-RD129\u003c\/td\u003e\n\u003ctd\u003eEAT-14216-1\u003c\/td\u003e\n\u003ctd\u003eEAT-187SL199A\u003c\/td\u003e\n\u003ctd\u003eYGA-32384\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Longfield Drivetrain","offers":[{"title":"TGI-311563","offer_id":50623135252728,"sku":"TGI-311563","price":439.0,"currency_code":"USD","in_stock":true},{"title":"TGI-311564","offer_id":50623135285496,"sku":"TGI-311564","price":439.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/files\/tgi-toy84rpg_parent.jpg?v=1790282455"},{"product_id":"tgi-31004x-parent-longfield-8-75-ring-pinion-gears-for-2016-2023-toyota-tacoma-4wd","title":"Longfield 2016-2023 Toyota Tacoma 8.75\" Ring \u0026 Pinion Gears","description":"\u003cp\u003eLooking for a Ring \u0026amp; Pinion that you can rely on even on the most punishing trails? Longfield is proud to offer Longfield Ring \u0026amp; Pinion Gears. These are the very same gears that have won multiple championships in professional desert racing \u0026amp; competitive rock crawling circuits and have proven themselves on some of the most grueling off-road courses in the world.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat makes Longfield Ring \u0026amp; Pinion Gears the best on the market?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Materials:\u003c\/strong\u003e Longfield use heat-treated 8620 chromoly tool steel for strength and wear resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Gear Teeth:\u003c\/strong\u003e Longfield only use the 5-cut process on the ring gear teeth instead of the cheaper 2-cut process used by most other aftermarket vendors. The 5-cut process results in teeth with a tapered tooth profile. This increases contact area and spreads the contact load along a wider area, resulting in less stress on the ring gear teeth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Machining:\u003c\/strong\u003eThe gear teeth are cut using Gleason CNC hobbing machines \u0026amp; cutters. Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency. The higher accuracy and surface finish also produces a quieter-running gear set, which means they will work great on the daily driver too.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Finish:\u003c\/strong\u003eAll Standard Finish ring gears are black phosphate coated for wear resistance \u0026amp; corrosion protection. The black phosphate coating provides a microporous layer on the surface to hold lubricants to minimize friction between gear teeth. This results in less wear during the initial break-in period and increases the overall life of the gears.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Value:\u003c\/strong\u003e Longfield go directly to Tier 1 OEM manufacturers to have gears made to Longfield's exact specifications. By cutting out the middlemen, Longfield can offer the highest quality gears at a competitive price.\u003c\/p\u003e\n\u003cp\u003eOn Toyota trucks we recommend 4.88's for 33\" tires and 5.29 for 35\" and larger.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from tool-grade 8620 steel and heat-treated for maximum strength and wear resistance.\u003c\/li\u003e\n\u003cli\u003eThe gear teeth are cut using Gleason CNC hobbing machines \u0026amp; cutters.\u003c\/li\u003e\n\u003cli\u003eGleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency.\u003c\/li\u003e\n\u003cli\u003eHigher accuracy and surface finish also produces a quieter-running gear set.\u003c\/li\u003e\n\u003cli\u003eGear teeth are cut using the 5-cut process to increase contact area to reduce load distribution and reduce stress on the gear teeth.\u003c\/li\u003e\n\u003cli\u003eBlack phosphate coating on ring gear to reduce friction \u0026amp; wear during break-in.\u003c\/li\u003e\n\u003cli\u003eFor Toyota 8.75\" rear axles only. Will not fit 8\" IFS Clamshell or 8\" solid axles.\u003c\/li\u003e\n\u003cli\u003ePinion Spline: 34-Spline\u003c\/li\u003e\n\u003cli\u003eRing Gear Bolts: 12 bolts (Ring Gear Bolts not included)\u003c\/li\u003e\n\u003cli\u003eRing Gear Diameter: 8.75\"\u003c\/li\u003e\n\u003cli\u003eRing Gear Rotation: Standard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRING \u0026amp; PINION BREAK-IN PROCEDURE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll new 3rd members require a break-in period to prevent damage from overheating. Any overloading or overheating during these periods can cause the gear oil to break down resulting in ring \u0026amp; pinion failure.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAfter installation drive lightly for 20-30 minutes and then allow the diff to cool for at least two hours.\u003c\/li\u003e\n\u003cli\u003eAvoid heavy throttle use during the first 500 miles.\u003c\/li\u003e\n\u003cli\u003eDo not tow a trailer during the first 500 miles.\u003c\/li\u003e\n\u003cli\u003eChange oil after 500 miles to remove any particles suspended in the oil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis may seem unnecessary, but it is very easy to damage the differential by loading it before the gear set is completely run in. New ring \u0026amp; pinion gears create excess heat when they are new. This excess heat can damage the heat treatment of the gears.\u003c\/p\u003e\n\u003ctable class=\"prod_details\" style=\"max-width: 650px;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-310042\u003c\/td\u003e\n\u003ctd\u003eTrail-Creeper 4.88 Toyota 8.75\" Ring \u0026amp; Pinion Gears\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-310043\u003c\/td\u003e\n\u003ctd\u003eTrail-Creeper 5.29 Toyota 8.75\" Ring \u0026amp; Pinion Gears\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eCompatible Lockers\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"prod_details\" style=\"max-width: 650px;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eARB\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-310042\u003c\/td\u003e\n\u003ctd\u003eARB-RD232\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-310043\u003c\/td\u003e\n\u003ctd\u003eARB-RD232\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Longfield Drivetrain","offers":[{"title":"TGI-310042 (4.88)","offer_id":50623135351032,"sku":"TGI-310042","price":379.0,"currency_code":"USD","in_stock":true},{"title":"TGI-310043 (5.29)","offer_id":50623135383800,"sku":"TGI-310043","price":379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/files\/tgi-310042_1.jpg?v=1790282457"},{"product_id":"tgi-31003x-parent-longfield-toyota-8-ifs-clamshell-ring-and-pinion-gears","title":"Longfield Toyota 8\" IFS Clamshell Ring and Pinion Gears","description":"\u003cp\u003eLooking for a Ring \u0026amp; Pinion that you can rely on even on the most punishing trails? Longfield is proud to offer Longfield Ring \u0026amp; Pinion Gears. These are the very same gears that have won multiple championships in professional desert racing \u0026amp; competitive rock crawling circuits and have proven themselves on some of the most grueling off-road courses in the world.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat makes Longfield Ring \u0026amp; Pinion Gears the best on the market?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Materials:\u003c\/strong\u003e Longfield use heat-treated 8620 chromoly tool steel for strength and wear resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Gear Teeth:\u003c\/strong\u003e Longfield only use the 5-cut process on the ring gear teeth instead of the cheaper 2-cut process used by most other aftermarket vendors. The 5-cut process results in teeth with a tapered tooth profile. This increases contact area and spreads the contact load along a wider area, resulting in less stress on the ring gear teeth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Machining:\u003c\/strong\u003eThe gear teeth are cut using Gleason CNC hobbing machines \u0026amp; cutters. Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency. The higher accuracy and surface finish also produces a quieter-running gear set, which means they will work great on the daily driver too.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Finish:\u003c\/strong\u003eAll Standard Finish ring gears are black phosphate coated for wear resistance \u0026amp; corrosion protection. The black phosphate coating provides a microporous layer on the surface to hold lubricants to minimize friction between gear teeth. This results in less wear during the initial break-in period and increases the overall life of the gears.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Value:\u003c\/strong\u003e Longfield go directly to Tier 1 OEM manufacturers to have gears made to Longfield's exact specifications. By cutting out the middlemen, Longfield can offer the highest quality gears at a competitive price.\u003c\/p\u003e\n\u003cp\u003eOn Toyota trucks we recommend 4.88's for 33\" tires and 5.29 for 35\" and larger.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor Toyota 8\" IFS Clamshell front axles only. Will not fit 7.5\" IFS front axles or 8\" solid axles.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRING \u0026amp; PINION BREAK-IN PROCEDURE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll new 3rd members require a break-in period to prevent damage from overheating. Any overloading or overheating during these periods can cause the gear oil to break down resulting in ring \u0026amp; pinion failure.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAfter installation drive lightly for 20-30 minutes and then allow the diff to cool for at least two hours.\u003c\/li\u003e\n\u003cli\u003eAvoid heavy throttle use during the first 500 miles.\u003c\/li\u003e\n\u003cli\u003eDo not tow a trailer during the first 500 miles.\u003c\/li\u003e\n\u003cli\u003eChange oil after 500 miles to remove any particles suspended in the oil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis may seem unnecessary, but it is very easy to damage the differential by loading it before the gear set is completely run in. New ring \u0026amp; pinion gears create excess heat when they are new. This excess heat can damage the heat treatment of the gears.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from tool-grade 8620 steel and heat-treated for maximum strength and wear resistance.\u003c\/li\u003e\n\u003cli\u003eThe gear teeth are cut using Gleason CNC hobbing machines \u0026amp; cutters. Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency.\u003c\/li\u003e\n\u003cli\u003eHigher accuracy and surface finish also produces a quieter-running gear set.\u003c\/li\u003e\n\u003cli\u003eGear teeth are cut using the 5-cut process to increase contact area to reduce load distribution and reduce stress on the gear teeth.\u003c\/li\u003e\n\u003cli\u003eBlack phosphate coating on ring gear to reduce friction \u0026amp; wear during break-in.\u003c\/li\u003e\n\u003cli\u003eFor Toyota 8\" IFS Clamshell front axles only. Will not fit 7.5\" IFS front axles or 8\" solid axles.\u003c\/li\u003e\n\u003cli\u003ePinion Spline: 29-Spline\u003c\/li\u003e\n\u003cli\u003eRing Gear Bolts: 10 bolts (Ring Gear Bolts not included)\u003c\/li\u003e\n\u003cli\u003eRing Gear Diameter: 8\"\u003c\/li\u003e\n\u003cli\u003eRing Gear Rotation: Reverse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2005-2023 Toyota Tacoma\u003c\/li\u003e\n\u003cli\u003e2002-2009 Toyota Land Cruiser Prado 120\u003c\/li\u003e\n\u003cli\u003e2003-2018 Toyota Lexus GX470\u003c\/li\u003e\n\u003cli\u003e2003-2024 Toyota 4Runner\u003c\/li\u003e\n\u003cli\u003e2009-2018 Toyota Land Cruiser Prado 150\u003c\/li\u003e\n\u003cli\u003e2003-2009 Toyota Hilux Surf\u003c\/li\u003e\n\u003cli\u003e2005-2018 Toyota Hilux Pickup\u003c\/li\u003e\n\u003cli\u003e2007-2014 Toyota FJ Cruiser\u003c\/li\u003e\n\u003cli\u003e2009-2018 Toyota Lexus GX460\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable class=\"prod_details\" style=\"max-width: 85%;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-310036\u003c\/td\u003e\n\u003ctd\u003eLongfield 4.88 8\" IFS Clamshell Ring \u0026amp; Pinion Gears (3.90 \u0026amp; Up Cases)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-310037\u003c\/td\u003e\n\u003ctd\u003eLongfield 4.88 Thick 8\" IFS Clamshell Ring \u0026amp; Pinion Gears (3.73 \u0026amp; Down Cases)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-310038\u003c\/td\u003e\n\u003ctd\u003eLongfield 5.29 8\" IFS Clamshell Ring \u0026amp; Pinion Gears (3.90 \u0026amp; Up Cases)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eCompatible Lockers\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"prod_details\" style=\"max-width: 85%;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eCompatible OEM Cases\u003c\/th\u003e\n\u003cth\u003eARB\u003c\/th\u003e\n\u003cth\u003eEaton E-Locker\u003c\/th\u003e\n\u003cth\u003eTorq Masters\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-310036\u003c\/td\u003e\n\u003ctd\u003e3.90 \u0026amp; Up Cases\u003c\/td\u003e\n\u003ctd\u003eARB-RD111\u003c\/td\u003e\n\u003ctd\u003eEAT-14221-1\u003c\/td\u003e\n\u003ctd\u003eTQM-TL-T8CS30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-310037\u003c\/td\u003e\n\u003ctd\u003e3.73 \u0026amp; Down Case\u003c\/td\u003e\n\u003ctd\u003eARB-RD121\u003c\/td\u003e\n\u003ctd\u003eEAT-14219-1\u003c\/td\u003e\n\u003ctd\u003eTQM-TL-T8CS30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-310038\u003c\/td\u003e\n\u003ctd\u003e3.90 \u0026amp; Up Cases\u003c\/td\u003e\n\u003ctd\u003eARB-RD111\u003c\/td\u003e\n\u003ctd\u003eEAT-14221-1\u003c\/td\u003e\n\u003ctd\u003eTQM-TL-T8CS30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Longfield Drivetrain","offers":[{"title":"TGI-310036 (4.88, 3.90 \u0026 Up Cases)","offer_id":50623135711480,"sku":"TGI-310036","price":279.0,"currency_code":"USD","in_stock":true},{"title":"TGI-310037 (4.88, 3.73 \u0026 Up Cases)","offer_id":50623135744248,"sku":"TGI-310037","price":279.0,"currency_code":"USD","in_stock":true},{"title":"TGI-310038 (5.29, 3.90 \u0026 Up Cases)","offer_id":50623135777016,"sku":"TGI-310038","price":279.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/files\/tgi-31003x_parent.jpg?v=1790282462"},{"product_id":"tgi-3064xx-parent-longfield-toyota-8-4-ring-pinion-gears","title":"Longfield Toyota 8.4\" Ring \u0026 Pinion Gears","description":"\u003cp\u003eLooking for a Ring \u0026amp; Pinion that you can rely on even on the most punishing trails? Longfield is proud to offer Longfield Ring \u0026amp; Pinion Gears. These are the very same gears that have won multiple championships in professional desert racing \u0026amp; competitive rock crawling circuits and have proven themselves on some of the most grueling off-road courses in the world.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat makes Longfield Ring \u0026amp; Pinion Gears the best on the market?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Materials:\u003c\/strong\u003e Longfield use heat-treated 8620 chromoly tool steel for strength and wear resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Gear Teeth:\u003c\/strong\u003e Longfield only use the 5-cut process on the ring gear teeth instead of the cheaper 2-cut process used by most other aftermarket vendors. The 5-cut process results in teeth with a tapered tooth profile. This increases contact area and spreads the contact load along a wider area, resulting in less stress on the ring gear teeth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Machining:\u003c\/strong\u003eThe gear teeth are cut using Gleason CNC hobbing machines \u0026amp; cutters. Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency. The higher accuracy and surface finish also produces a quieter-running gear set, which means they will work great on the daily driver too.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Finish:\u003c\/strong\u003eAll Standard Finish ring gears are black phosphate coated for wear resistance \u0026amp; corrosion protection. The black phosphate coating provides a microporous layer on the surface to hold lubricants to minimize friction between gear teeth. This results in less wear during the initial break-in period and increases the overall life of the gears.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Value:\u003c\/strong\u003e Longfield go directly to Tier 1 OEM manufacturers to have gears made to Longfield's exact specifications. By cutting out the middlemen, Longfield can offer the highest quality gears at a competitive price.\u003c\/p\u003e\n\u003cp\u003eOn Toyota trucks we recommend 4.88's for 33\" tires and 5.29 for 35\" and larger.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRING \u0026amp; PINION BREAK-IN PROCEDURE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll new 3rd members require a break-in period to prevent damage from overheating. Any overloading or overheating during these periods can cause the gear oil to break down resulting in ring \u0026amp; pinion failure.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAfter installation drive lightly for 20-30 minutes and then allow the diff to cool for at least two hours.\u003c\/li\u003e\n\u003cli\u003eAvoid heavy throttle use during the first 500 miles.\u003c\/li\u003e\n\u003cli\u003eDo not tow a trailer during the first 500 miles.\u003c\/li\u003e\n\u003cli\u003eChange oil after 500 miles to remove any particles suspended in the oil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis may seem unnecessary, but it is very easy to damage the differential by loading it before the gear set is completely run in. New ring \u0026amp; pinion gears create excess heat when they are new. This excess heat can damage the heat treatment of the gears.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from tool-grade 8620 steel and heat-treated for maximum strength and wear resistance.\u003c\/li\u003e\n\u003cli\u003eThe gear teeth are cut using Gleason CNC hobbing machines \u0026amp; cutters. Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency.\u003c\/li\u003e\n\u003cli\u003eHigher accuracy and surface finish also produces a quieter-running gear set.\u003c\/li\u003e\n\u003cli\u003eGear teeth are cut using the 5-cut process to increase contact area to reduce load distribution and reduce stress on the gear teeth.\u003c\/li\u003e\n\u003cli\u003eBlack phosphate coating on ring gear to reduce friction \u0026amp; wear during break-in.\u003c\/li\u003e\n\u003cli\u003eFor Toyota 8.4\" rear axles only. Will not fit 8\" IFS Clamshell or 8\" solid axles.\u003c\/li\u003e\n\u003cli\u003ePinion Spline: 30-Spline\u003c\/li\u003e\n\u003cli\u003eRing Gear Bolts: 12 bolts (Ring Gear Bolts not included)\u003c\/li\u003e\n\u003cli\u003eRing Gear Diameter: 8.4\"\u003c\/li\u003e\n\u003cli\u003eRing Gear Rotation: Standard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1995-2015 Toyota Tacoma - Non E-Locker Only\u003c\/li\u003e\n\u003cli\u003e1999-2006 Toyota Tundra\u003c\/li\u003e\n\u003cli\u003e1993-1998 Toyota T100\u003c\/li\u003e\n\u003cli\u003e2001-2007 Toyota Sequoia\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable class=\"prod_details\" style=\"max-width: 85%;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-306429-1\u003c\/td\u003e\n\u003ctd\u003eLongfield 4.88 Toyota 8.4\" Ring \u0026amp; Pinion Gears\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-306430-1\u003c\/td\u003e\n\u003ctd\u003eLongfield 5.29 Toyota 8.4\" Ring \u0026amp; Pinion Gears\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eCompatible Lockers\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"prod_details\" style=\"max-width: 85%;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eARB\u003c\/th\u003e\n\u003cth\u003eEaton E-Locker\u003c\/th\u003e\n\u003cth\u003eDetroit Locker\u003c\/th\u003e\n\u003cth\u003eSpool\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-306429-1\u003c\/td\u003e\n\u003ctd\u003eARB-RD129\u003c\/td\u003e\n\u003ctd\u003eEAT-14216-1\u003c\/td\u003e\n\u003ctd\u003eEAT-187SL199A\u003c\/td\u003e\n\u003ctd\u003eYGA-32384\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-306430-1\u003c\/td\u003e\n\u003ctd\u003eARB-RD129\u003c\/td\u003e\n\u003ctd\u003eEAT-14216-1\u003c\/td\u003e\n\u003ctd\u003eEAT-187SL199A\u003c\/td\u003e\n\u003ctd\u003eYGA-32384\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Longfield Drivetrain","offers":[{"title":"TGI-306429-1 (4.88)","offer_id":50623136137464,"sku":"TGI-306429-1","price":279.0,"currency_code":"USD","in_stock":true},{"title":"TGI-306430-1 (5.29)","offer_id":50623136170232,"sku":"TGI-306430-1","price":279.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/files\/tgi-3064xx_parent.jpg?v=1790282465"},{"product_id":"tgi-31237x-parent-longfield-super-finish-toyota-8-ifs-clamshell-ring-pinion-gears","title":"Longfield Super Finish Toyota 8\" IFS Clamshell Ring \u0026 Pinion Gears","description":"\u003cp\u003eLooking for a Ring \u0026amp; Pinion that you can rely on even on the most punishing trails? Longfield is proud to offer Longfield Super Finish Ring \u0026amp; Pinion Gears. These are the very same gears that have won multiple championships in professional desert racing \u0026amp; competitive rock crawling circuits and have proven themselves on some of the most grueling off-road courses in the world.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat makes Longfield Ring \u0026amp; Pinion Gears the best on the market?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Materials:\u003c\/strong\u003e Longfield use heat-treated 8620 chromoly tool steel for strength and wear resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Gear Teeth:\u003c\/strong\u003e Longfield only use the 5-cut process on the ring gear teeth instead of the cheaper 2-cut process used by most other aftermarket vendors. The 5-cut process results in teeth with a tapered tooth profile. This increases contact area and spreads the contact load along a wider area, resulting in less stress on the ring gear teeth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Machining:\u003c\/strong\u003eThe gear teeth are cut using Gleason CNC hobbing machines \u0026amp; cutters. Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency. The higher accuracy and surface finish also produces a quieter-running gear set, which means they will work great on the daily driver too.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Finish:\u003c\/strong\u003e Longfield's Super Finish gears allow you to skip the break-in period and get on the trail now! The aerospace-grade REM® Isotropic Super Finishing (ISF ®) process removes the microscopic peaks in the material and creates a surface on the ring and pinion gears with a roughness of less than 10 ¬µin average surface roughness. This means that there is less friction between the gears, reducing wear by 95% and allowing the gears and bearings to run cooler and last longer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Value:\u003c\/strong\u003e Longfield go directly to Tier 1 OEM manufacturers to have gears made to Longfield's exact specifications. By cutting out the middlemen, Longfield can offer the highest quality gears at a competitive price.\u003c\/p\u003e\n\u003cp\u003eOn Toyota trucks we recommend 4.88's for 33\" tires and 5.29 for 35\" and larger.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor Toyota 8\" IFS Clamshell front axles only. Will not fit 7.5\" IFS front axles or 8\" solid axles.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from tool-grade 8620 steel and heat-treated for maximum strength and wear resistance.\u003c\/li\u003e\n\u003cli\u003eThe gear teeth are cut using Gleason CNC hobbing machines \u0026amp; cutters. Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency.\u003c\/li\u003e\n\u003cli\u003eGear teeth are cut using the 5-cut process to increase contact area to reduce load distribution and reduce stress on the gear teeth.\u003c\/li\u003e\n\u003cli\u003eHigher accuracy and surface finish also produces a quieter-running gear set.\u003c\/li\u003e\n\u003cli\u003eNo break-in period.\u003c\/li\u003e\n\u003cli\u003eLess friction.\u003c\/li\u003e\n\u003cli\u003eReduced wear allowing bearings and gears to last longer.\u003c\/li\u003e\n\u003cli\u003eTreated with REM® Isotropic Super Finishing (ISF) process.\u003c\/li\u003e\n\u003cli\u003eThe REM® Isotropic Super Finishing (ISF) process removes the microscopic peaks in the material and creates a surface on the ring and pinion gears with a roughness of less than 10 ¬µin Ra! This means that there is less friction between the gears, reducing wear by 95% and allowing the gears and bearings to run cooler and last longer.\u003c\/li\u003e\n\u003cli\u003eNon-directional surface that increases lubricant retention on the gear surface, reducing lubrication requirements.\u003c\/li\u003e\n\u003cli\u003eFor Toyota 8\" IFS Clamshell front axles only. Will not fit 7.5\" IFS front axles or 8\" solid axles.\u003c\/li\u003e\n\u003cli\u003ePinion Spline: 29-Spline\u003c\/li\u003e\n\u003cli\u003eRing Gear Bolts: 10 bolts (Ring Gear Bolts not included)\u003c\/li\u003e\n\u003cli\u003eRing Gear Diameter: 8\"\u003c\/li\u003e\n\u003cli\u003eRing Gear Rotation: Reverse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2005-2023 Toyota Tacoma\u003c\/li\u003e\n\u003cli\u003e2002-2009 Toyota Land Cruiser Prado 120\u003c\/li\u003e\n\u003cli\u003e2003-2018 Toyota Lexus GX470\u003c\/li\u003e\n\u003cli\u003e2003-2024 Toyota 4Runner\u003c\/li\u003e\n\u003cli\u003e2009-2018 Toyota Land Cruiser Prado 150\u003c\/li\u003e\n\u003cli\u003e2003-2009 Toyota Hilux Surf\u003c\/li\u003e\n\u003cli\u003e2005-2018 Toyota Hilux Pickup\u003c\/li\u003e\n\u003cli\u003e2007-2014 Toyota FJ Cruiser\u003c\/li\u003e\n\u003cli\u003e2009-2018 Toyota Lexus GX460\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable class=\"prod_details\" style=\"max-width: 85%;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-312372\u003c\/td\u003e\n\u003ctd\u003eLongfield Super Finish 4.88 8\" IFS Clamshell Ring \u0026amp; Pinion Gears (3.90 \u0026amp; Up Cases)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-312373\u003c\/td\u003e\n\u003ctd\u003eLongfield Super Finish 4.88 Thick 8\" IFS Clamshell Ring \u0026amp; Pinion Gears (3.73 \u0026amp; Down Cases)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-312374\u003c\/td\u003e\n\u003ctd\u003eLongfield Super Finish 5.29 8\" IFS Clamshell Ring \u0026amp; Pinion Gears (3.90 \u0026amp; Up Cases)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eCompatible Lockers\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"prod_details\" style=\"max-width: 85%;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eCompatible OEM Cases\u003c\/th\u003e\n\u003cth\u003eARB\u003c\/th\u003e\n\u003cth\u003eEaton E-Locker\u003c\/th\u003e\n\u003cth\u003eTorq Masters\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-312372\u003c\/td\u003e\n\u003ctd\u003e3.90 \u0026amp; Up Cases\u003c\/td\u003e\n\u003ctd\u003eARB-RD111\u003c\/td\u003e\n\u003ctd\u003eEAT-14221-1\u003c\/td\u003e\n\u003ctd\u003eTQM-TL-T8CS30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-312373\u003c\/td\u003e\n\u003ctd\u003e3.73 \u0026amp; Down Case\u003c\/td\u003e\n\u003ctd\u003eARB-RD121\u003c\/td\u003e\n\u003ctd\u003eEAT-14219-1\u003c\/td\u003e\n\u003ctd\u003eTQM-TL-T8CS30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTGI-312374\u003c\/td\u003e\n\u003ctd\u003e3.90 \u0026amp; Up Cases\u003c\/td\u003e\n\u003ctd\u003eARB-RD111\u003c\/td\u003e\n\u003ctd\u003eEAT-14221-1\u003c\/td\u003e\n\u003ctd\u003eTQM-TL-T8CS30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Longfield Drivetrain","offers":[{"title":"TGI-312372","offer_id":50623136268536,"sku":"TGI-312372","price":369.0,"currency_code":"USD","in_stock":true},{"title":"TGI-312373","offer_id":50623136301304,"sku":"TGI-312373","price":369.0,"currency_code":"USD","in_stock":true},{"title":"TGI-312374","offer_id":50623136334072,"sku":"TGI-312374","price":369.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/files\/tgi-31237x_parent.jpg?v=1790282469"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/3174\/2968\/collections\/longfield-logo.png?v=1790283154","url":"https:\/\/polyperformance.com\/collections\/longfield-drivetrain.oembed","provider":"POLY PERFORMANCE","version":"1.0","type":"link"}