|
Poly Performance Inc. » Ring & Pinion/Inst. Kits » Superior Ring & Pinions » Superior Dana 44 Ring & Pinion Sets
| Superior Dana 44 Ring & Pinion Sets |
Description:
- Ring and pinion gears are premium quality from start to finish
- Superior starts with the purest 8620 gear steel forgings available in the USA and Europe
- Computer controlled machining is followed by the latest gear cutting technology and superior heat-treating
- Each gear is finished with extra lapping for an ideal contact pattern and smoother, quieter operation
- Add Internal Carrier Rebuild kit to freshen up your rear end
- Internal Carrier Rebuild Kits includes side gears, spider gears, cross pin, thrust washers, and a cross pin bolt or pin
- Exclusive 2 Year Manufacturer's Warranty
- Cryo-treat your gear set!
Cryogenically treated materials show a marked increase in many areas:
- Wear resistance
- Toughness
- Eliminates nearly all residual stress
- Dimensional stability
- Fatigue resistance
- Denser microstructure
| R/G Diameter: |
8.5" |
| R/G Bolts: |
10-7/16" x 24 RH |
| Cover Bolts: |
10 |
| Carrier Breaks: |
3.73/3-92 |
| Spline: |
1.375"/26 |
Standard Rotation Applications
'72-86 Jeep CJ5 - Rear; '74-84 Jeep J10/20 - Front/Rear;
'03-06 Jeep Wrangler TJ - Front/Rear ; '67-80 Chevy 1/2 & 3/4 Ton - Front;
'69+ Dodge 1/2 & 3/4 Ton - Front; '66-77 Ford Bronco 1/2 & 3/4 Ton - Front;
'67-80 International Scount - Front/Rear |
| Gearset |
Part # |
Install Kit |
Overhaul Kit |
| 3.08 |
SAG-D44308 |
SAG-25-2033 |
SAG-35-2033 |
| 3.54 |
SAG-D44354 |
SAG-25-2033 |
SAG-35-2033 |
| 3.73 |
SAG-D44373 |
SAG-25-2033 |
SAG-35-2033 |
| 3.92 |
SAG-D44392 |
SAG-25-2033 |
SAG-35-2033 |
| 4.10 |
SAG-D44409 |
SAG-25-2033 |
SAG-35-2033 |
| 4.27 |
SAG-D44427 |
SAG-25-2033 |
SAG-35-2033 |
| 4.55 |
SAG-D44455 |
SAG-25-2033 |
SAG-35-2033 |
| 4.89 |
SAG-D44489 |
SAG-25-2033 |
SAG-35-2033 |
| 5.13 |
SAG-D44513 |
SAG-25-2033 |
SAG-35-2033 |
| 5.38 |
SAG-D44538 |
SAG-25-2033 |
SAG-35-2033 |
| 5.89 |
SAG-D44589 |
SAG-25-2033 |
SAG-35-2033 |
| 4.10 Thick1 |
SAG-D44411X |
SAG-25-2033 |
SAG-35-2033 |
| 4.55 Thick1 |
SAG-D44455X |
SAG-25-2033 |
SAG-35-2033 |
| 4.88 Thick1 |
SAG-D44488X |
SAG-25-2033 |
SAG-35-2033 |
| 5.13 Thick1 |
SAG-D44513X |
SAG-25-2033 |
SAG-35-2033 |
| |
| '03-06 Jeep Rubicon/TJ- Front/Rear |
| Gearset |
Part # |
Install Kit |
Overhaul Kit |
| 4.56 |
SAG-D44456XR |
SAG-25-2045 |
SAG-35-2045 |
| 4.88 |
SAG-D44488XR |
SAG-25-2045 |
SAG-35-2045 |
| 5.13 |
SAG-D44513XR |
SAG-25-2045 |
SAG-35-2045 |
| |
Reverse Rotation Applications
'79-86 Ford Bronco/F150 - Front;
'79+ 1/2 & 3/4 Ton - Front;
'69+ Dodge 1/2 & 3/4 Ton - Front |
| Gearset |
Part # |
Install Kit |
Overhaul Kit |
| 3.54 |
SAG-D44354R |
SAG-25-2033A |
SAG-35-2033A |
| 3.73 |
SAG-D44373R |
SAG-25-2033A |
SAG-35-2033A |
| 4.10 |
SAG-D44409R |
SAG-25-2033A |
SAG-35-2033A |
| 4.56 |
SAG-D44456R |
SAG-25-2033A |
SAG-35-2033A |
| 4.88 |
SAG-D44488R |
SAG-25-2033A |
SAG-35-2033A |
| 5.13 |
SAG-D44513R |
SAG-25-2033A |
SAG-35-2033A |
| 5.38 |
SAG-D44538R |
SAG-25-2033A |
SAG-35-2033A |
Notes:
1 Thick Gears are designed to work on 3.73 and numerically lower cases
Carrier Part #RRP-DAN706025X required for 30-Spline Standard or Reverse Rotation Dana 44s when changing gears from 3.73 and numerically lower to 3.92 and numerically higher |
|
|
Click images below for larger view.
|
|
