Description:
Poly Performance Double Adjuster Tube Adapter
- The Poly Performance Double Adjuster Tube Adapter is designed to eliminate the need for jam nuts that are normally used when building link suspension & steering systems
- The use of the Double Adjuster allows the suspension/steering link to be adjusted without removal
- The Double Adjuster allows the user to fine-tune the suspension/steering geometry by loosening the pinch bolt and turning the adjuster sleeve
- Ideal for link suspension designs with weld on bushings/joints at one end or bent suspension links
- The weld on tube adapter is made from solid stock 1018 Steel
- The tube adapter seals the link off from water or other debris entering the link which can cause damage over time
- An integrated drain hole lets any water that enters the threads of the adapter drain out
Adapters Include:
- (1) Weld on Tube Adapter with Pinch Bolt Slit and Tubes
- (1) Zinc Plated Double Adjuster Sleeve to be used with a Thread Shank Rod End
- (1) Pinch Bolt Hardware
- All Adjusters Use A Left Hand Threaded Rod End or Johnny Joint
| Part # |
Description |
| PPM-3620-07-14-10 |
Double Adjuster Tube Adapter, 7/8"-14 Left Hand Thread, 1" ID Tube |
| PPM-3620-07-18-10 |
Double Adjuster Tube Adapter, 7/8"-18 Left Hand Thread, 1" ID Tube |
| PPM-3620-10-12 |
Double Adjuster Tube Adapter, 1"-14 Left Hand Thread, 1 1/4" ID Tube
|
| PPM-3620-12-13 |
Double Adjuster Tube Adapter, 1 1/4" - 12 Left Hand Thread, 1 3/8" ID Tube |
| PPM-3620-12-14 |
Double Adjuster Tube Adapter, 1 1/4" - 12 Left Hand Thread, 1 1/2" ID Tube |
|
