Description:
CST 00-04 Superduty 8" suspension lift kit includes front and rear cst progressive stack soft ride leaf springs, panhard bar and pitman arm drop mounts, front sway bar links, front and rear u-bolts. Shocks are required front and rear and we offer a single or dual shock set up depending on what you are looking for. Excursion models will require a separate 1" lift block and u-bolt kit for the rear and is available.
- Soft Ride CST Progressive Stack Leaf Springs
- All Parts Covered In A High Quality Gloss Black Powder Coat Finish
- Ability To Be Put Back To Stock
- Designed To Fit 37" Tires On Up To 10" Wide Wheels (38" Tires May Be Used But Will Require Trimming)
Kit Components:
- CSS-F23-1 - Front Box Kit '00-'04
- CSL-F19-1 - Front 8" Progressive Stack Leaf Springs '00-'04
- CSL-F19-2 - Rear Progressive Stack Leaf Springs '00-'04
- CSS-F22-2 - Universal Carrier Bearing Spacer Kit
- CSU-SD15-9R - Rear U-Bolt Kit
- CSR-2500 - CST Performance Rear Shock (Optional)
- CSR-2655 - CST Performance Rear Shock (2 Required)
Optional Components:
- CSS-F5-1 - Front Dual Shock Hoop '00-'04
- CSB-C14-1 - 1" Lift Block Kit
- CSU-SD15-10R - Rear U-Bolt Kit (for use w/ 1" block)
- CSS-F28-2 - Universal Carrier Bearing Spacer Kit (for 2 peice drive shafts)
| Part # |
Description |
Notes |
| CST-CSK-SD23-1 |
F/R Springs, Box Kit, Carrier Bearing Kit, Rear U-Bolts |
1,3,4 |
| CST-CSK-SD23-2 |
F/R Springs, Box Kit, 1” Block Kit, Rear U-Bolts |
2,3,4 |
| CST-CSK-SD23-3 |
F/R Springs, Box Kit, Shock Hoops, Carrier Bearing Kit, Rear U-Bolts |
1,3,4 |
| CST-CSK-SD23-4 |
F/R Springs, Box Kit, Shock Hoops, 1” Block Kit, Rear U-Bolts |
2,3,4 |
Notes:
1 Vehicles with a 2 pieces drive shaft will need the carrier bearing adjusted to reduce rear driveline vibration
2 Vehicles with a 1 piece drive shaft will need a 1.5 degree shim installed under the rear leaf springs to push the pinion angle up
3 The factory front drive shaft will need to be lengthened 1 ½” over stock lift only; in some cases Rear drive shaft may need to be lengthened if 8” rear springs are used
4 In some cases Rear drive shaft may need to be lengthened if 8” rear springs are used
- The factory front drive shaft will need to be lengthened 1.5" over stock
- Vehicles with a one piece drive shaft will need a 1.5 degree shim installed under the rear leaf springs to push the pinion angle up
- In some cases the rear drive shaft may need to be lengthened if 8" springs are used
- Recommended tire size: 37” tall tires on 8 or 10” wide wheels
- Larger diameter tire and wheel combinations may be used, but will require pre-fitment and possible trimming |
